Manual Scheppach HG34 (page 20 of 124) (English, German, Dutch, French, Italian, Polish, Swedish, Norwegian)

781661

Zoom out

Zoom in

1/124

20 GB

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

mWarning! Noxious fumes!

Working with harmful / noxious dusts represents a risk

to the health of the person operating the device and to

anyone near the work area.

• Wear protective glasses, hearing protection,

dust protection mask and protective gloves.

• Dang er of burns! The workpiece

gets hot during grinding. Never touch the part you

are grinding. Allow the workpiece to cool sufciently

rst. When grinding for longer periods, stop grind-

ing from time to time and allow the workpiece to cool

before continuing. Do not operate the device for

continuous periods exceeding 30 minutes.

• The double grinding machine is intended for dry

grinding of the surfaces of metal objects. The device

may only be used for dry grinding.

• Do not grind materials containing asbestos. Asbes-

tos is a known carcinogen.

• Do not use damaged grinding wheels .

• Only use grinding wheels with details that corr

spond with those given on the device ratin plate. The

circumferential speed should be equal to or greater

than the value given on the device rating plate.

• Adjust the eye guard mounts (spark deectors)

and the eye guards periodically so that wear on the

grinding wheels can be evened out. Keep the gap as

small as possible.

• Avoid contact with the moving grinding wheel.

• Never leave the device working unattended.

• Never use the device for a purpose for which it was

not intended.

• Before you insert the mains plug into the socket, al-

ways check that the device is switched off.

• Always switch the device on before bringing the

workpiece into contact with the grinding wheel. After

grinding, lift off the workpiece before switching the

device off.

• Hold the workpiece rmly with both hands at all

times when working.

• Always keep proper footing and balance.

• After you have nished grinding metal, allow the

grinding wheel(s) to come to a standstill.

• When taking a break from your work, before carrying

out any tasks on the device itself and when you are

not using the device, always pull the mains plug out

of the mains socket.

• Handle the device carefully and treat it with respect.

Always keep the device clean, dry and free of oil or

grease.

• Remain alert at all times! Always watch what you

are doing and proceed with caution. Do not use the

device if you cannot concentrate or you are feeling

unwell.

• Store grinding wheels in such a way that they are

not subject to mechanical loads or damaging envi-

ronmental inuences.

17. Avoid unintentionally starting up the device.

• Check that the switch is set to OFF on the device

• when the mains plug is inserted into the mains

socket.

18. Using an extension lead for working outdoors.

• When working outside, always use an approved and

appropriately labelled extension lead.

19. Remain alert.

• Watch what you are doing. Proceed with caution. Do

not use electrical power tools if you cannot concen-

trate.

20. Check the electrical power tool for damage.

• Before the electrical power tool is used, carefully

check the safety equipment and any slightly dam-

aged parts to see that they are still working properly.

• Check that all moving parts on the tool are work-

ing properly, can move freely and are not damaged.

All parts must be correctly attached and full all the

requirements necessary to allow the electrical power

tool to operate properly.

• Damaged safety equipment and components must

be properly repaired or replaced at a competent

electrical equipment repair centre unless otherwise

indicated in the operating instructions.

• Damaged switches must be replaced at a Customer

Service Centre.

• Never use an electrical power tool that cannot be

switched on and off properly.

21. CAUTION!

• The use of inserted tools and accessories other than

those recommended by the manufacturer could lead

to you being injured.

22. Have your electrical power tool repaired at an

electrical equipment repair specialist.

• This electrical power tool complies with the relevant

safety regulations. Repairs may only be carried out

by a specialist electrical repair centre using original

spare parts, otherwise injury could occur to the user.

m Safety advice relating specically

to bench grinders

• Do not touch the mains lead if it becomes damaged

or cut through while you are using the device. Pull

the plug out of the mains socket immediately and

have the device repaired by a suitably qualied per-

son or at your service centre.

• Do not operate the device if it is damp and do not

use it in a damp environment.

• If you use the device outdoors, always connect it

through a residual current device (RCD) with a maxi-

mum trip current of 30 mA.If using an extension lead,

always use one that is approved for outdoor use.

• If a dangerous situation arises, pull the mains plug

immediately out of the mains socket.

• Always work with the mains lead leading away from

the rear of the device.

• Dang er of re from ying sparks !

Grinding metal creates ying sparks. For this reason,

always make sure that nobody is placed in any danger

and that there are no inammable materials near the

working area.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HG34 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 4.98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HG34 Manual

Product: