782150

Scheppach HD 2018 - Kraft Manual

18
Zoom out
Zoom in
Previous page
1/32
Next page
18 / 32
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
• Filter bag*
• Shavings bag*
• Exhaust hose*
* Not necessarily included in the scope of delivery!
10. Storage
Store the device and its accessories in a dark, dry and
frost-proof place that is inaccessible to children. The
optimum storage temperature is between 5 and 30˚C.
Store the electrical tool in its original packaging.
11. Electrical connection
Connection and repair work on the electrical equip-
ment must be carried out by a qualied technician
only.
The installed electric motor is factory connected rea-
dy for operation.
The connection made by the customer as well as any
extension cables used must comply with all relevant
regula tions.
Importand note
Defective electrical connection cables
If the power cable is damaged, it must be replaced by
the manufacturer, its customer service or a similarly
qualied person to avoid hazards.
Electrical connection cables often suffer isolation da-
mage.
Possible causes are:
• Pinch points when connection cables are run
throught window or door gabs.
• Kinks resulting from incorrect attachment of laying
of the connection cable.
• Cuts resulting from running over the connection
cable.
• Isolation damage resulting from forcefully pulling
out of the wall socket.
Such defective electrical connection cables must not
be used as the isolation damage makes them extrem-
ly hazardous.
Check electrical connection cables regularly for da-
mage. Make sure the cable is disconnected from the
mains when checking.
Electrical connection cables must comply with the re-
gulations applicable in your country.
One phase motor
• The mains voltage must comply with the specica-
tion on the motor name plate.
• Extension cables must have a cross section of at
least 1.0 sqmm.
• The mains is protected by a 16 A slowblow fuse.
7. Assembly
For packaging reasons your machine is delivered in
semi-assembled state.
• Mount the two wheels, each with a hexagonal
screw with a shank (M10x75), two washers and a
nut on the base frame. Lock the nut against the
base so the wheels can run freely. (Fig. 1)
• Attach the side covering loosely to the base frame
using at-head screws M8 x 40 mm and screw
nuts. Do not tighten completely. Fig. 2, 3
• Attach the cross-member to the side covering left and right
with at-head screws M 8 x 12 and screw nuts. Fig. 4, 5
• Remove all screws and nuts form the housing.
• Attach the housing to the side coverings using at-
head screws M5 x 20 and screw nuts. Securely
tighten all nuts. Fig. 6
• Slide the clamp through the tabs on the lter bag
and x the lter bag on the container. Fig. 7
• Position the support bar into the housing and hang
the lter bag from it. Fig. 1
• Attach the shavings bag to the lower air ventilator
using the clamp. Fig. 7
• Attach the exhaust hose to the nozzle on the
housing and afx it with a hose clamp. Fig. 8
• Attach the hose coupling to the other end of the
hose using a hose clamp. Fig. 9
The exhaust system should be cleaned every time
the shavings bag is changed.
Damaged lters and bags must be immediately chan-
ged in order to keep the amount of dust that escapes
into the work environment as low as possible.
8. Initial operation
Note safety instructions before operation. The data
on the motor type plate (voltage and frequency) must
conform to the mains supply voltage and frequency.
After connection to the mains, the Dust Extractor is
ready for operation.
9. Maintenance
For all maintenance and cleaning tasks, tum off motor
and unplug mains.
• Connection and repair work on the electrical instal-
lation may be carried out by a qualied electrician
only.
• For constant performance, periodi cally shake out
lter bag vigorously. Between cleanings, beating
the bag with the hand several times is sufcient.
• The sawdust bag must be replaced a1 the latest
when the sawdust is within 10 cm. of the housing
collar.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HD 2018 - Kraft at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HD 2018 - Kraft in the language / languages: English, German, French as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info