782031

Scheppach HCE1450 Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 21
10. Electrical connection
The electrical motor installed is connected and
ready for operation. The
connection complies with the applicable VDE and
DIN provisions. The customer‘s mains connec-
tion as well as the extension cable used must
also comply with these regulations.
Damaged electrical connection cable
The insulation on electrical connection cables is often
damaged.
This may have the following causes:
• Passage points, where connection cables are
passed through windows or doors.
• Kinks where the connection cable has been im-
properly fastened or routed.
• Places where the connection cables have been cut
due to being driven over.
• Insulation damage due to being ripped out of the
wall outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not
be used and are
life-threatening due to the insulation damage.
Check the electrical connection cables for damage
regularly. Make sure that the
connection cable does not hang on the power net-
work during the inspection.
Electrical connection cables must comply with the
applicable VDE and DIN provisions. Only use con-
nection cables with the marking “H05VV-F“.
The printing of the type designation on the connec-
tion cable is mandatory.
AC motor
• The mains voltage must be 230-240 V~.
• Extension cables up to 25 m length must have a
cross section of 2.5 mm2 .
Connections and repairs of electrical equipment may
only be carried out by an
electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine rating plate
high-pressure cleaner switches on.
• Releasing the trigger (B) switches off the device.
• The high pressure in the system is maintained.
• You can lock and unlock the trigger (B) of the spray
gun (10) by pressing the locking button (C).
• Locking the trigger (B) will ensure that the device is
not started unintentionally.
If there are leaks in the water system, switch the
device off immediately with the On/Off switch (6) and
disconnect the device from the mains. There is a risk
of electric shock! Check the connection of all water
connections and accessories.
Using the accessories (Fig. F):
Patio cleaner (12):
• The patio cleaner (12) is suitable for cleaning
ground and wall surfaces without splashing.
• Only activate the patio cleaner (12) once it is fully
in contact with the surface to be cleaned.
• Do not guide the patio cleaner (12) over free-stan-
ding corners or edges.
• The patio cleaner (12) is not suitable for scrubbing
or scraping
Cleaning agent container (13):
Use only cleaning agents that are expressly intended
for use in high-pressure
cleaners.
• The cleaning agent container (13) is suitable for
spraying cleaning agent e.g. onto cars.
• Fill the cleaning agent container (13) with the cor-
responding cleaner.
• The cleaning agent is dosed automatically in low-
pressure operation.
Variable nozzle (16):
• The variable nozzle (16) is suitable for cleaning
work on cars for example.
• The width of the water jet can be adjusted by tur-
ning the variable nozzle (16).
Pausing operation (Fig. A / F):
• Release the trigger (B) on the spray gun (10).
• With longer breaks, switch off the device with the
On/Off switch (5).
Finishing operation (Fig. A / F):
• Release the trigger (B) on the spray gun (10).
• Switch off the device with the On/Off switch (5).
• Turn off the water tap
• Press the trigger (B) on the spray gun (10) to allow
the residual pressure to dissipate.
• Pull out the mains plug and wind the mains cable
(2) onto the cable winding cleat (3).
• Disconnect the high-pressure cleaner from the
water supply.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HCE1450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HCE1450 in the language / languages: English, German as an attachment in your email.

The manual is 1.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info