782133
9
Zoom out
Zoom in
Previous page
1/112
Next page
9
pulled off the reel.
• Check the power cable.
• Neveruseafaultyordamagedpowercable.
• Do not use the cable to pull the plug out of the sock-
et.
• Protect the cable from heat, oil and sharp edges.
• Do not leave the machine in the rain and never use it
in damp or wet conditions.
• Provide good lighting.
• Do not saw near flammable liquids or gases.
• Nonslipshoesarerecommendedwhenworkingout-
doors.
• Wear a hair net if you have long hair. Avoid abnormal
working postures.
• Operators have to be at least 18 years of age.
• Trainees of at least 16 years of age are allowed to use
the machine under supervision.
• Keep children away from the machine when it is con-
nected to the power supply.
• Keep your workplace clean of wood scrap and any
unnecessary objects.
• An untidy work area invites accidents.
• Do not allow other persons, especially children, to
touch the tool or cable.
• Keep them out of your work area.
• Persons working on the machine should not be dis-
tracted.
• Carry out conversions, adjustments, measurements
and cleaning jobs only when the motor is switched
off. - Pull out the power plug!
• Before switching on, make sure that all keys and
wrenches have been removed from the tool.
• Switch off the motor and pull out the power plug
before you leave the workplace.
• Retallguards andsafetydevices immediatelyaf-
ter you have completed any repairs or maintenance
work.
• Be sure to observe the safety information and op-
erating and maintenance instructions issued by the
manufacturer, as well as the dimensions listed in the
Technical Data.
• It is imperative to observe the accident prevention
regulations in force in your area as well as all other
generally recognized rules of safety.
• Notetheinformationpublishedbyyourprofessional
associations.
• Do not use any low-powered machines for heavy duty
work.
• Do not mis-use the cable Make sure you stand
squarely and keep your balance at all times.
• Check that the moving parts are in good working or-
der, that they do not jam, and that no parts are dam-
aged.
• Make sure that all parts are fitted correctly and that
all other operating conditions are properly fulfilled.
• Unless otherwise stated in the operating instruc-
tions, damaged safety devices and parts have to be
repaired or replaced by an authorized service center.
• Have damaged switches replaced by a customer ser-
vice workshop.
• This electric tool complies with the pertinent safety
regulations.
• Repairsaretobecarriedoutonlybyaqualiedelec-
• N´utilisezletambourdecâblequ´enétatdéroulé.
• Vérifiez la conduite de raccordement au réseau.
• N´utilisezaucuneconduitederaccordementerronée
ou endommagée.
• N´utilisez pas le câble pour tirer le connecteur de
la prise.
• Protégez le câble de la chaleur, contre tout contact
avec de l´huile et des arêtes acérées.
• N´exposezpaslamachineàlapluieetnel´utilisez
pas dans un environnement humide ou mouillé.
• Veillez à un bon éclairage.
• Nesciezpasàproximitédeuidesoudegazcom-
bustibles.
• Lors de travaux en plein air, il est recommandé de
porter des chaussures antidérapantes.
• Portez un filet à cheveux pour les cheveux longs.
• Evitez une tenue anormale du corps
• La personne opératrice doit avoir au moins 18 ans,
les stagiaires au moins. 16 ans, cependant unique-
ment sous surveillance.
• Tenir les enfants à l´écart des appareils raccordés au
réseau.
• Maintenez votre lieu de travail sans déchets de bois
etpièceséparpillées.
• Le désordre du lieu de travail peut entraîner des acci-
dents.
• Ne laissez aucune autre personne toucher lʼoutil
ou le câble, ceci est en particulier valable pour les
enfants.
• Tenez-les à l´écart de votre poste de travail.
• Il ne faut pas détourner l´attention de personnes tra-
vaillant sur la machine.
• Effectuez les changements d´équipement ainsi que
les travaux de réglage, de mesure et de nettoyage
uniquement lorsque le moteur est mis hors circuit.
- Tirez la fiche de contact -
• Contrôlez, avant la mise en circuit, que les clés et les
outils de réglage sont bien retirés.
• En sortant de votre poste de travail, mettez le moteur
hors circuit et retirez la fiche de contact.
• Tous les dispositifs de protection et de sécurité
doiventêtre remisen placedèslaréparationoula
maintenance terminée.
• Les consignes de sécurité, de fonctionnement et de
maintenance du producteur, ainsi que les dimen-
sions indiquées dans les caractéristiques techniques
doivent être respectées.
• Les prescriptions de prévention contre les accidents
en rapport et les autres règles reconnues de façon
générale du point de vue de la technique de sécurité
doivent être respectées.
• N´utilisez aucun outil trop faible pour des travaux
difficiles.
• N´utilisezpas lecâble àdesnspourlesquellesil
n´est pas conçu!
• Veillezà voustenirdefaçonsûre,etgardezàtout
moment l´équilibre.
• Contrôlezsilafonctiondespiècesmobilesestcor-
recte, si elles ne sont pas grippées ou si certaines
piècessontabîmées.
• Touteslespiècesdoiventêtrecorrectementmontées
et toutes les conditions remplies pour assurer un
fonctionnement impeccable de l´outil.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HA1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HA1600 in the language / languages: All languages as an attachment in your email.

The manual is 2.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info