782120

Scheppach HA 2000 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
8 english
Initial operation
Note safety instructions before operation. The data on the
motor type plate (voltage and frequency) must conform to
the mains supply voltage and frequency. After connection
to the mains, the Dust Extractor ha 2000 is ready for op-
eration.
Electrical connection
Connection and repair work on the electrical equipment
must be carried out by a qualified technician only.
The installed electric motor is factory connected ready for
operation.
The connection made by the customer as well as any ex-
tension cables used must comply with all relevant regula-
tions.
Importand note
Defective electrical connection cables
Electrical connection cables often suffer isolation dam-
age.
Possible causes are:
• Pinch points when connection cables are run throught
window or door gabs.
• Kinks resulting from incorrect attachment of laying of
the connection cable.
• Cuts resulting from running over the connection cable.
• Isolation damage resulting from forcefully pulling out of
the wall socket.
Such defective electrical connection cables must not be used
as the isolation damage makes them extremly hazardous.
Check electrical connection cables regularly for damage.
Make sure the cable is disconnected from the mains when
checking.
Electrical connection cables must comply with the regula-
tions applicable in your country.
One phase motor
• The mains voltage must comply with the specification on
the motor name plate.
• Extension cables must have a cross section of at least
1.0 sqmm.
• The mains is protected by a 16 A slowblow fuse.
When making inquiries please specify the following:
• Motor manufacturer
• Motor current type
• Motor nameplate specifications
• Switch nameplate specifications
When sending the motor in, always send the complete
drive unit including the switch.
Maintenance
For all maintenance and cleaning tasks, tum off motor
and unplug mains.
• Connection and repair work on the electrical installation
may be carried out by a qualified electrician only.
• For constant performance, periodically shake out filter
bag vigorously. Between cleanings, beating the bag with
the hand several times is sufficient.
• The sawdust bag must be replaced a1 the latest when
the sawdust is within 10 cm. of the housing collar.
Special accessories
Filter bag U/S/G Part no. 7508 0010
Filter catridge U/S/G Part no. 7500 6000
Disposable sawdust bag, 25pc. Patr no. 7500 1400
Reusable sawdust bag, 20pc. Part no. 7500 1500
Extension coupling Part no. 7500 3300
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HA 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HA 2000 in the language / languages: English, German, Dutch, Danish, French, Italian, Finnish as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info