Manual Scheppach HA 2000 (page 9 of 28) (English, German, Dutch, Danish, French, Italian, Finnish)

782120

Zoom out

Zoom in

1/28

english 7

• Do not allow foreign objects such as screws, nails, plas-

tic or wood chips to enter the cleaning nozzle.

• The machine must only be used with original parts and

orginal accessories supplies by the manufacturer.

• The Exhaust System ha 2000 is constructed exclusively

for exhaust-vacuuming wood chips and saw dust and

may only be used in connection with wood processing

machines.

• When vacuuming shop ﬂoors, wood or metal pieces may

not be vacuumed.

• Any other use exceeds authorization. The manufacturer

is not responsible for any damagesresulting from unau-

thorized use; risk is the sole responsibility of the opera-

tor.

• The safety, work and maintenance instructions of the

manufacturer as well as the technical data given in the

calibrations and dimensions must be adhered to.

• Relevant accident prevention regulations and other, gen-

erally recognized safety-technical rules must also be ad-

hered to.

• The machine may only be used, maintained, and operat-

ed by persons familiar with and instructed in its operat-

ing and procedures. Arbitrary alterations to the machine

release the manufacturer from all responsibiliy for any

resulting damages.

• The machine may only be used with original accessories

made by the manufacturer.

Included in shipment

Dust extractor ha 2000

Filter bag

Earthing set

For older machines, the earthing set must be orde-red

separately: Art. no. 7503 0024.

Extractor hose diam. 100 mm

Hose end piece diam. 100 mm

Operating instructions

 Remaining hazards

The machine has been built using modem technology in

accordance with recognized safety rules.Some remaining

hazards, however, may still exist.

• Wood chips and sawdust can be health hazards. Be sure

to wear personal protective gear such as safety goggles

and a dust mask.

• Dust inhalation may occur when closing and replacing

the dust bag.

Please note the instructions concerning proper disposal

in the operating manual (e.g. the use of P2 dust masks)

to prevent dust inhalation.

• Noise can be a health hazard. The permitted noise level

is exceeded when working. Be sure to wear personal pro-

tective gear such as ear protection.

• The use of incorrect or damaged mains cables can lead

to injuries caused by electricity.

• Even when all safety measures are taken, some remaining

hazards which are not yet evident may still be present.

• Remaining hazards can be minimized by following the

instructions in “Safety Precautions”, “Proper Use“ and

in the entire operating manual.

Technical data

Dimensions:

Overall length mm 656

Overall width mm 490

Overall height mm 1850

Overall height with ﬁlter cartridge mm 1850

Ectractor duct connections ø mm 100

Hose ø mm 100

Hose length mm 2000

Wheel diameter mm 75

Approx. weight kg 24,4

Performance:

Rate of air ﬂow m3/h 800

Pressure differential Pa 1000

Filter aera (ﬁlter bag) m2 1,00

Filter aera (ﬁlter cartidge) m2 5,00

Sawdust bag capacity litres 80

Power plant:

Electric motor 230 V/5O Hz

Nominal input P1 0,40 kW

Output power P2 0,30 kW

Motorspeed 1/min. 2780

Work Place Emissions Values:

Empty Run Noise dB (A) 75

Working Noise dB (A) 75

Assembly

For packaging reasons your ha 2000 is delivered in semi-as-

sembled state.

Tools required for assembly

not included in shipment

1 Open-end wrench SW 10

2 Open-end wrenches SW 13

1 Nut driver SW 8

1 Screwdriver

Assembly frame Fig. 1

Axle and wheels

2 lock washers

• Place the wheels onto the wheel axle. Use the assembly

tool and a hammer, and force the fastening cap on to

the wheel axle.

Fig. 2

Screw housing onto frame

4 hex screws M8 x 12

4 serrated lockwashers A 8,2

Insert ﬁlter bag hanger.

Extractor hose

Put hose clamps over hose ends,Insert hose couplings and

tighten the hose clamp. Clamp the extractor hose tightly onto

the housing bracket with hose clamp.

Filter bag, Fig. 3

• Lay locking band (279 mm diameter) on housing.

• Fit ﬁlter bag over housing collar and fasten with locking

band.

Sawdust bag, Fig. 4

• Open clamping lug.

• Fit sawdust bag over ejection opening, fold at clamp re-

cess and close clamping lug.

• Lay locking band (370 mm diameter)over sawdust bag

and fasten.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HA 2000 in the language / languages: English, German, Dutch, Danish, French, Italian, Finnish as an attachment in your email.

The manual is 1.12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HA 2000 Manual

Product: