781428
21
Zoom out
Zoom in
Previous page
1/96
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 21
Only use the device for the purpose
specied in these original operating in-
structions.
You are responsible for safety in the
work area.
If the connection cable of this unit is
damaged, it must be replaced by the
manufacturer or their service depart-
ment or a similar qualied person in or-
der to avoid hazards. The voltage of
230 volts AC indicated on the type plate
of the pump must correspond to the
mains voltage present.
Never lift, transport or fasten the pump
by the mains cable.
Make sure that the electrical plug con-
nections are located in a ood-proof ar-
ea or are protected against moisture.
Before any work on the pump, pull out
the mains plug.
Ensure that the pump is not exposed to
a direct water jet.
The operator is responsible for compli-
ance with local safety and installation
regulations (ask a qualied electrician if
necessary).
The user must implement suitable
measures (e.g. installation of an alarm
system, reserve pump or similar) to pre-
vent consequential damage caused by
ooding of rooms in the event of pump
faults.
If the pump fails, repair work may only
be carried out by a qualied electrician
or by customer service.
Only use original spare parts.
The pump must never be allowed to run
dry or be operated with a fully closed
suction line. Damage to the pump
caused by dry running will invalidate
the manufacturers warranty.
5. Safety notes
This device is not designed to be op-
erated by persons (including children)
with impaired physical, sensory or men-
tal capabilities, or who have insu󰀩cient
experience and/or insu󰀩cient knowl-
edge unless they are being supervised
by a person who is responsible for their
safety or they are receiving instruction
about how this device is to be used.
Children should not be left unattended,
to ensure they do not play with the de-
vice.
Keep packaging lms out of the reach
of babies and children. Risk of su󰀨oca-
tion!
The user is responsible for third parties
in the working area of the device.
Prior to commissioning, it must be en-
sured by means of expert testing that
the required electrical protective meas-
ures are in place.
m Warning! The pump may only be
used in and around stagnant water, gar-
den and swimming ponds with a resid-
ual current circuit breaker with a rated
residual triggering current of up to 30
mA (per VDE 0100 parts 702 and 738).
The pump is not suitable for use in
swimming pools, paddling pools of any
kind and other waters where persons or
animals may be present during opera-
tion.
Operating the pump while humans or
animals are in the danger zone is not
permitted. Ask your electrician!
Always carry out a visual inspection of
the unit before use. Do not use the unit
if safety devices are damaged or worn
out. Never disable safety devices.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach GP1300 Jet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach GP1300 Jet in the language / languages: English, German, French, Swedish, Finnish as an attachment in your email.

The manual is 2.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info