782263
22
Zoom out
Zoom in
Previous page
1/42
Next page
22 english
Special accessory sawblades
Only use original scheppach accessory!
Art.No.
Special sawblade 6310 4101
Carbide saw blade for coated furniture boards
Dimensions:
Total ø mm 250
Borehole ø mm 30
Numberofteeth80Z
Saw blade 5100 5556
Universalblankbladecarbideplacementforlongitudina-
l and lateral
cuts in wood and chipboards.
Dimensions:
Total ø mm 315
Borehole ø mm 30
Numberofteeth48WZ
Saw blade 5100 5504
Universalblankbladecarbideplacementforlongitudinal
and cross cuts in hardwood and chipboards.
Dimensions:
Total ø mm 300
Borehole ø mm 30
Numberofteeth48WZ
Saw blade 5100 5507
Universalblankbladecarbideplacementforlongitudinal
and cross cuts in solid wood.
Dimensions:
Total ø mm 300
Borehole ø mm 30
Numberofteeth72Z
Saw blade 7986 3001
Specialsawblade–lownoise,carbideplacementfor
synthetically coated furniture boards.
Dimensions:
Total ø mm 300
Borehole ø mm 30
Numberofteeth60Z
Saw blade 5100 5501
Universalblankbladeforsoftandhardwood.
Dimensions:
Total ø mm 300
Borehole ø mm 30
Numberofteeth28WZ
Pre-cut saw blade 5472 0313
Carbide saw blade for pre-cutting synthetically coated
furniture boards
Dimensions:
Total ø mm 120
Borehole ø mm 20
Numberofteeth26Z
Noise Characteristics
Measurement Requirements in Accordance with Draft Pre-
Norm EN 1870-1: 1995-07
The values listed are emission measurements and therefore
do not necessarily represent reliable work values. Though a
correlation does exist between emission levels and
immision levels it is not possible to determine from this
with reliability whether additional safety precautions are
required or not. Factors which may influence existing work
area immission levels are length of exposure, individual
characteristics of the work area, other noise emission
sourcesetc.(e.g.numberofmachinesandotherprocesses
in the vicinity). Permissable work area noise levels may
vary from country to country. The information provided
here should however enable the user to better estimate
hazards and risks.
sound power level in dB
idle LWA=89.7dB(A)
operation LWA=93.3dB(A)
sound pressure level in work area
in dB
idleLpAeq=81.2dB(A)
operationLpAeg=82.9dB(A)
AmeasurementerrorK=4dBappliesfortheemissionvalues
listed.
Dust Emission Data
The dust emission levels measured in accordance with the
"Guidelines for Testing Dust Emission (Concentration
Parameters)ofWoodProcessingMachines"issuedbythe
CommitteeofWoodExpertsarebelow
2mg/m3.ThismeanscompliancewiththeTRKairquality
levelsforwooddustwhichapplyintheFederalRepublicof
Germany is ensured if the machine is connected to a proper
operative suction unit with an air speed of not less than 20
m/s.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Forsa 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Forsa 4.0 in the language / languages: English, German as an attachment in your email.

The manual is 7.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info