Manual Scheppach DS920 (page 17 of 68) (English, German, Dutch, French, Finnish)

781636

Zoom out

Zoom in

1/68

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

17 І 68

o) Do not use the power tool in the vicinity of in-

ammable materials. Sparks may ignite these ma-

terials.

p) Do not use insertion tools which require liquid

coolants. Using water or other liquid coolants may

cause electric shock.

Further safety notes for all applications - kickback

and corresponding safety notes

A kickback is the sudden reaction caused by rotating

insertion tools such as a grinding disk, grinding plate,

wire brush, etc. which has got caught or which blocks.

Getting caught or blocking results in the immedia-

testop of the rotating insertion tool. This accelerates

the uncontrolled power tool against the rotary direction

of the insertion tool.

lf for example a grinding disk gets caught or blocks

in the work piece, the edge of the grinding disk which

penetrates the work piece may get caught, the grin-

ding disk will make a sudden movement or cause a

kickback. As a result, the grinding disk moves towards

the operator or away from the operator, depending on

the rotary direction ofthe disk when it blocks. This may

also cause the fracture of grinding disks.

Kickbacks are the result of the improper or incorrect

use of power tools. Kickbacks can be avoided when

observing the following precautionary measures.

a) Hold the power tool rmly in your hands and

bring your body and arms in a position which al-

lows you to adequately react to kickback forces.

Always use the additional handle, if available.

This ensures you the utmost control of kickback

forces or reaction torques when starting your power

tool. When taking appropriate precautions, the ope-

rator is in the position to control kickback and reac-

tion forces.

b) Keep your hands away from rotating insertion

tools. The insertion tool may move over your hand

in the event of a kickback.

c) Keep your body away from the area where the

power tool may move in the event of a kickback.

Kickbacks always move the power tool in opposite

direction to the movement of the grinding disk at the

spot where it blocks.

d) Corners, sharp edges, etc. must be processed

with special care. Make sure that the insertion tool

does not bounce back from or get trapped on the

work piece. The rotating insertion tool tends to jam

in corners, at sharp edges or when it bounces back.

This may cause the loss of control or a kickback.

e) Do not use chain rings or toothed saw blades.

These insertion tools frequently cause kickbacks or

the loss of control of your power tool.

Additional safety notes regarding grinding with

sandpaper- Special safety notes regarding grin-

ding with sandpaper

a) Do not use oversized abrasive sheets; always

observe the manufacturer‘s specications for

abrasive sheet dimensions. Abrasive sheets pro-

truding the grinding plate may cause injury or result

in the blocking or tearing apart of the abrasive sheet

or in kickbacks.

c) Only use accessory parts especially provided for

this tool and recommended by the manufacturer.

The mere fact that you can mount accessory parts

to your power tool does not ensure safe use.

d) The permissible speed of the insertion tool must

be at least as high as the maximum speed speci-

ed on the power tool. Accessories with a higher

speed may break and y off.

e) The outer diameter and the thickness of the in-

sertion tool must comply with the dimensions

specied on your power tool. lt is not possible to

shield or control insertion tools with different dimen-

sions.

f) Grinding disks, anges, grinding plates or other

accessory parts must exactly mate the grinding

spindie of your power tool. Insertion tools which

do not exactly mate the grinding spindle of your po-

wertool will perform irregular rotations, cause high

vibrations and thus the loss of control.

g) Do not use damaged insertion tools. Prior to

each application, you must check insertion tools

such as grinding disks for chippings and cracks,

grinding plates for cracks, wear or major abra-

sion, wire brushes for loose or broken wires. lf

the power tool or insertion tool falls down, you

must check it for damages, or use an undama-

ged insertion tool. After you have checked and

inserted the insertion tool, both you and persans

in the vicinity must stay out of the Ievel of the

rotating insertion tool, and the tool must be ope-

rated at maximum speed for one minute. Most

of the damaged insertion tools will break within this

test period.

h) Wear personal protective equipment. Depending

on the application of the power tool, you must

wear a full face shield, eye protection or gogg-

les.lf appropriate, you must wear a dust mask,

hearing protection, protective gloves or a special

apron which protects you against small grinding

chips and material particles. Protect your eyes

against foreign objects which y off du ring different

operations. The purpose of dust masks and brea-

thing equipment is to lter the dust generated during

the operation. Long-term exposure to high noise pol-

lution may cause hearing loss.

i) Make sure that other persons stay a safe dis-

tance away from your working area. Persons

accessing your working area must wear personal

protective equipment. Fragments of the work piece

or broken insertion tools may y off and cause injury

even outside the direct working area.

j) Always hold the tool by its insulated handles

when the insertion tool may come into contact

with hidden power lines or with the power cord

of the power tool. Contact with live lines may ener-

gise metaI tool parts and cause electric shock.

k) Keep the power cord away from rotating inser-

tion tools. lf you lose control of the power tool, the

power cord may be cut or trapped, and your hand

or arm may get into the path of the rotating insertion

tool..

l) Never put aside the power tool before the com-

plete halt ofthe insertion tool. Rotating insertion

tools may get in contact with the place of deposit

thus causing the loss of control of the tool.

m)Switch oft the power tool while you carry it

around. Your clothes may be trapped when uninten-

tionally getting in contact with the rotating insertion

tool and the insertion tool may penetrate your body.

n) The ventilationslots of your power tool must be

cleaned on a regular basis. The motor fan sucks in

dust, and the accumulation of metaI dust may cause

electrical risks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DS920 in the language / languages: English, German, Dutch, French, Finnish as an attachment in your email.

The manual is 2.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DS920 Manual

Product: