781460
25
Zoom out
Zoom in
Previous page
1/124
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 25
14. Troubleshooting
Trouble Possible cause Solution
Quality of cut is poor. Cutting tool is dull. Sharpen or replace cutting tool.
Cutting too aggressive cut. Reduce the working pressure.
Cutting tool is positioned below
workpiece center line.
Lower cutting tool to maximum 3mm above the centre
line of workpiece.
Lathe speed too slow Increase lathe speed
Excessive vibration
when turning thin work-
pieces.
Cutting tool is positioned below
workpiece centre line.
Raise cutting tool to centerline of workpiece.
Cutting to aggressively. Use a lighter touch.
Excessive vibration
when turning large
workpieces or bowls.
Headstock and/or tailstock improper-
ly located at ends of workpiece.
Check for proper workpiece centres at headstock and/
or tailstock.
Workpiece is unbalanced. Trim end of workpiece until workpiece is more bal-
anced.
Lathe will not turn on. Cord not connected into electrical
outlet.
Connect to electrical outlet.
Lathe will not turn off. Damaged or faulty power switch
and/or internal wiring.
Unplug the lathe from its electrical outlet immediately.
Do not operate lathe until it is repaired by a qualied
service technician.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical and
electronic equipment (WEEE). This product must be
disposed of at a designated collection point. This can
occur, for example, by handing it in at an authorised
collecting point for the recycling of waste electrical
and electronic equipment.
Improper handling of waste equipment may have
negative consequences for the environment and hu-
man health due to potentially hazardous substances
that are often contained in electrical and electronic
equipment. By properly disposing of this product, you
are also contributing to the effective use of natural
resources. You can obtain information on collection
points for waste equipment from your municipal ad-
ministration, public waste disposal authority, an au-
thorised body for the disposal of waste electrical and
electronic equipment or your waste disposal compa-
ny.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach DM600VARIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DM600VARIO in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 7.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info