Manual Scheppach DM-ABS1200E - Dineiger (page 17 of 28) (English, German)

782148

Zoom out

Zoom in

1/28

 www.dineiger.com  info@dineiger.com  +49 (0)

8462 200 62 88 /  +49 (0) 8462 200 62 89

17 / 28

posal in the operating manual (e.g. the use of P2

dust masks) to prevent dust inhalation.

• Noise can be a health hazard. The permitted noise

level is exceeded when working. Be sure to wear

personal protective gear such as ear protection.

• The use of incorrect or damaged mains cables can

lead to injuries caused by electricity.

• Even when all safety measures are taken, some

remaining hazards which are not yet evident may

still be present.

• Remaining hazards can be minimized by following

the instructions in “Safety Precautions”, “Proper

Use“ and in the entire operating manual.

Keep this safety information in a safe place.

6. Technical data

Technical Data

Dimensions L x W x H (mm): 870 x 500 x 1500

Overall height with lter bag

1500

Ectractor duct connections

ø mm

100

Hose length mm 2000

Wheel diameter mm 150

Approx. weight kg 18,5

Rate of air ow m3/h 1150

Pressure differential Pa 1000

Filter aera (lter bag) m2 ca. 1

Sawdust bag capacity litres 50l

Performance

Electric motor 230-240V/50 Hz

Nominal input P1 (S1) 0,55 kW

Output power P2

(S1)

0,34 kW

Motorspeed 1/min. 2850

LPA= 83,64 dB(A) LWA= 98,41 dB(A) (EN 60335-2)

Subject to technical modications!

7. Assembly

For packaging reasons your machine is delivered in

semi-assembled state.

• Mount the two wheels, each with a hexagonal

screw with a shank (M10x75), two washers and a

nut on the base frame. Lock the nut against the

base so the wheels can run freely. (Fig. 1)

• Attach the side covering loosely to the base frame

using at-head screws M8 x 40 mm and screw

nuts. Do not tighten completely. Fig. 2, 3

• Attach the cross-member to the side covering left

and right with at-head screws M 8 x 12 and screw

nuts. Fig. 4, 5

• Remove all screws and nuts form the housing.

• Attach the housing to the side coverings using at-

head screws M5 x 20 and screw nuts. Securely

tighten all nuts. Fig. 6

• Be sure to observe the safety information and ope-

rating and maintenance instructions issued by the

manufacturer, as well as the dimensions listed in

the Technical Data.

• It is imperative to observe the accident prevention

regulations in force in your area as well as all other

generally recognized rules of safety.

• Note the information published by your professio-

nal associations.

• Do not use any low-powered machines for heavy

duty work.

• Do not mis-use the cable

• Make sure you stand squarely and keep your ba-

lance at all times.

• Check that the moving parts are in good working

order, that they do not jam, and that no parts are

damaged. Make sure that all parts are tted cor-

rectly and that all other operating conditions are

properly fullled.

• Unless otherwise stated in the operating instruc-

tions, damaged safety devices and parts have to

be repaired or replaced by an authorized service

center.

• Have damaged switches replaced by a customer

service workshop.

• This electric tool complies with the pertinent safety

regulations. Repairs are to be carried out only by

a qualied electrician using original replacement

parts or the user may suffer an accident.

• If necessary, wear suitable personal protection

equipment. This could consist of:

- Ear-muffs to prevent the risk of damaging your

hearing

- A breathing mask to prevent the risk of inhaling

hazardous dust

• The operator has to be informed about the condi-

tions with an inuence on noise development.

• Faults on the machine have to be reported to the

person in charge as soon as they are discovered.

• This appliance is not suitable for the collection of

dangerous dust.

• This equipment is not designed to be used by peop-

le (including children) with limited physical, sensory

or mental capacities or those with no experience

and/or knowledge unless they are supervised by a

person who is responsible for their safety or they

have received instructions from such a person in

how to use the equipment safely. Children must al-

ways be supervised in order to ensure that they do

not play with the equipment.

Remaining hazards

The machine has been built using modem technology

in accordance with recognized safety rules.Some re-

maining hazards, however, may still exist.

• Wood chips and sawdust can be health hazards.

Be sure to wear personal protective gear such as

safety goggles and a dust mask.

• Dust inhalation may occur when closing and repla-

cing the dust bag.

• Please note the instructions concerning proper dis-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DM-ABS1200E - Dineiger in the language / languages: English, German as an attachment in your email.

The manual is 6.74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DM-ABS1200E - Dineiger Manual

Product: