Manual Scheppach Di1050 (page 17 of 56) (English, German, French, Polish)

782596

Zoom out

Zoom in

1/56

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

GB І 17

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: Carbon brushes, v-belt, batteries, drill

bit

* Not necessarily included in the scope of delivery!

Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C.

Store the electrical tool in its original packaging.

Cover the electrical tool in order to protect it from

dust and moisture.

Store the operating manual with the electrical tool.

Disposal and recycling

The equipment is supplied in packaging to prevent

it from being damaged in transit. The raw materials

in this packaging can be reused or recycled. Never

place batteries in your household refuse, in re or in

water. Batteries should be collected, recycled or dis-

posed of by environment-friendly means. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must

not be disposed of together with domestic

waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical

and electronic equipment (WEEE). This product must

be disposed of at a designated collection point. This

can occur, for example, by handing it in at an author-

ised collecting point for the recycling of waste elec-

trical and electronic equipment. Improper handling

of waste equipment may have negative consequenc-

es for the environment and human health due to po-

tentially hazardous substances that are often con-

tained in electrical and electronic equipment. By

properly disposing of this product, you are also con-

tributing to the effective use of natural resources.

You can obtain information on collection points for

waste equipment from your municipal administration,

public waste disposal authority, an authorised body

for the disposal of waste electrical and electronic

equipment or your waste disposal company.

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insula-

tion damage.

Check the electrical connection cables for damage

regularly. Make sure that the connection cable does

not hang on the power network during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking „H05VV-F“.

The printing of the type designation on the connec-

tion cable is mandatory.

AC motor

• The mains voltage must be 230 V~

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

Cleaning and Servicing

Pull the mains plug before any adjustments,

maintenance or repair.

m Have any work on the device that is not de-

scribed in this instruction guide performed by

a professional. Only use original parts. Allow

the device to cool off before any maintenance

or cleaning is undertaken. There is a risk of burn-

ing!

Always check the device before using it for obvi-

ous defects such as loose, worn or damaged parts,

correct the positioning of screws or other parts. Ex-

change the damaged parts.

Cleaning

Do not use any cleaning agents or solvents. Chemi-

cal substances can etch the plastic parts of the de-

vice. Never clean the device under running water.

• Thoroughly clean the device after every use.

• Clean the ventilation openings and the surface of

the device with a soft brush or cloth.

• Remove chips, dust and dirt with a vacuum clean-

er if necessary.

• Lubricate moving parts regularly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Di1050 in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 2.94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Di1050 Manual

Product: