Manual Scheppach DECO-XL (page 19 of 132) (English, German, Dutch, French, Italian, Polish, Finnish)

781463

Zoom out

Zoom in

1/132

19GB

in the open position.

–Damaged protective devices and parts must be

properly repaired or replaced by a recognised

workshop, insofar as nothing different is speci-

ed in the operating manual.

–Damaged switches must be replaced at a cus-

tomer service workshop.

–Do not use any faulty or damaged connection

cables.

–Do not use any electric tool on which the switch

cannot be switched on and off.

21 Attention!

–Exercise elevated caution for double mitre cuts.

22 Attention!

–The use of other insertion tools and other ac-

cessories can entail a risk of injury.

23 Have your electric tool repaired by a qualied

electrician

–This electric tool conforms to the applicable

safety regulations. Repairs may only be per-

formed by an electrician using original spare

parts. Otherwise accidents can occur.

Additional Safety Rules for Scroll Saws

• This scroll saw is intended for use in dry condi-

tions, and for indoor use only.

• Do not cut pieces of material too small to hold by

hand outside the blade guard.

• Avoid awkward hand positions where a sudden slip

could cause a hand to move into the blade.

• Always use the blade guard to avoid possible injury

due to blade breakage.

• Never leave the scroll saw work area with the pow-

er 01), or before the machine has come to a com-

plete stop.

• Do not perform layout, assembly or set up work

on the table while the cutting tool is in operation.

• Never turn your scroll saw on before clearing the

table of all objects: (tools, scraps of wood, etc) ex-

cept for the workpiece and related feed or support

devices for the operation planned.

Remaining hazards

The machine has been built using modern technolo-

gy in accor dance with recognized safety rules. Some

remaining hazards, how ever, may still exist.

• Long hair and loose clothing can be hazardous

when the work piece is rotating. Wear personal

protective gear such as a hair net and tight tting

work clothes.

• Saw dust and wood chips can be hazardous. Wear

per so nal protective gear such as safety goggles

and a dust mask.

• The use of incorrect or damaged mains cables can

lead to injuries caused by electricity.

• Even when all safety measures are taken, some

remaining hazards which are not yet evident may

still be present.

• Remaining hazards can be minimized by following

the instructions in „Safety Precautions“, „Proper

Use“ and in the entire operating manual.

• Do not force the machine unnecessarily: excessive

cutt ing pressure may lead to rapid deterioration of

the blade and a decrease in performance in terms

of nish and cutting precision.

• Avoid accidental starts: do not press the start but-

ton while inserting the plug into the socket.

Keep this safety information in a safe place.

6. Technical data

Extent of delivery

Scroll saw

Foot switch

Accessories kit

Operating instructions

Technical data

Dimensions

L x W x H mm 630 x 320 x 330

Bench size mm ø 254 x 414

Saw blade

length mm 127

Cutting height

max. mm 50

Working depth mm 406

Lifting

movement mm 17,5

Lifting speed 1/min (electronical) 550 – 1600

Bench diagonal adjustment left

degrees 0 – 45

Weight kg 11,2

Suction connection

piece ø mm 35

Motor

Electrical motor 230-240 V~/50 Hz

Power consumption

(S1) W

(S2 30min) W

(S2 5min) W

125

Sound pressure level on

oper at or’s ear measured in

accordance with DIN 45635 with

max. speed during idle running

77,3 dB (A)

7. Installation

Setting the saw bench, Fig. 2

Setting the angle scale

• Release the star button (A and bring the saw bench

(B) to a right angle (C) in relation to the saw blade.

• Use a 90° angle tc measure the right angle be-

tween the blade and the bench. The saw blade be

90° to the angle.

• Close the star button again when the distance be-

tween the blade and the 90° angle is at a minimum.

The bench should then be at 90° to the saw blade.

• Release the lock screw (D) and bring the indicator

to the zero position. Fasten the screw. Please note:

the angle scale is a useful piece of supplementary

equip ment, but should not be used for precision

work. Use scrap wood for saw tests, adjust the

bench if neces sary.

Note: The bench should not be on the motor block,

this can cause undesireable noise.

Horizontal saw bench and diagonal cuts, Fig. 2+3

• The saw bench can be positioned into a 450 di-

agonal position or be left in the horizontal position.

• You can read off the approximate slope angle

by using the angle scale located under the work

bench. For more exact adjustment, use scrap wood

for some saw tests; adjust the bench if necessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DECO-XL in the language / languages: English, German, Dutch, French, Italian, Polish, Finnish as an attachment in your email.

The manual is 4.38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DECO-XL Manual

Product: