Manual Scheppach DECO-XL (page 17 of 132) (English, German, Dutch, French, Italian, Polish, Finnish)

781463

Zoom out

Zoom in

1/132

17GB

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working ex-

perience with your new scheppach Scroll Saw.

Note:

According to the applicable product liability law the

manufacturer of this device is not liable for damages

which arise on or in connection with this device in

case of:

• improper handling

• non-compliance with the instructions for use

• repairs by third party, non authorized skilled work-

ers

• installation and replacement of non-original spare

parts

• improper use

• failures of the electrical system due to the non-

compliance with the electrical specications and

the VDE 0100, DIN 57113 / VDE 0113 regulations

Warning

To avoid electrical hazards, re hazards, or damage

to the tool, use proper circuit protection.

Your drill press is wired at the factory for 230 V oper-

ation. Connect to a 230 V/15 amp branch circuit and

use a 15 amp time delay fuse or circuit breaker. To

avoid shock or re, replace power cord immediately if

it is worn, cut or damaged in any way.

Recommendations:

Read the entire text of the operating instructions pri-

or to the assembly and operation of the device.

These operating instructions are intended to make it

easier for you to get familiar with your device and uti-

lize its intended possibilities of use.

The operating instructions contain important notes

on how to work safely, properly and economically

with your machine and how to avoid dangers, save

repair costs, reduce downtime, and increase the reli-

ability and working life of the machine.

In addition to the safety regulations contained herein,

you must in any case comply with the applicable reg-

ulations of your country with respect to the operation

of the machine.

Put the operating instructions in a clear plastic folder

to protect them from dirt and humidity, and store them

near the machine. The instructions must be read and

carefully observed by each operator prior to starting

the work. Only persons who have been trained in the

use of the machine and have been informed on the

related dangers and risks are allowed to use the ma-

chine. The required minimum age must be met.

In addition to the safety notes contained in the pre-

sent operating instructions and the special regu-

lations of your country, the generally recognized

technical rules for the operation of wood working ma-

chines must be observed.

2. Device description (Fig. 1)

1. Clamping screw: for removing the saw blade.

2. Blade guard: protects your hands from injury.

3. Work piece holder

4. Shavings blower: keeps the workpiece area free

from dust.

5. electronical speed switch deco 402: Speed switch

6. On/Off switch

7. Angle scale: you can read the angle position of

the table with this scale.

8. Lighting

9. Foot switch

10. Setting gauge for saw blades without pin

11. Switch to change between foot switch operation

and continuous operation

3. Scope of delivery

• When you unpack the device, check all parts for

possible transport damages. In case of complaints

the supplier is to be informed immediately.

• Complaints received at a later date will not be

acknow ledged.

• Check the delivery for completeness.

• Read the operating instructions to make yourself

familiar with the device prior to using it.

• Only use original scheppach parts for accessories

as well as for wearing and spare parts. Spare parts

are available from your specialized dealer.

• Specify our part numbers as well as the type and

year of construction of the device in your orders.

Attention

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

4. Intended use

CE tested machines meet all valid EC machine

guidelines as well as all relevent guidelines for each

machine.

• The machine must only be used in technically per-

fect con dition in accordance with its designated

use and the in structions set out in the operating

manual, and only by safety-conscious persons

who are fully aware of the risks involved in oerating

the machine. Any functional dis orders, especially

those affecting the safety of the machine, sholud

terefore be rectied immediately.

• The safety, work and maintenance instructions

of the manufacturer as well as the technical data

given in the calibrations and dimensions must be

adhered to.

• Relevant accident prevention regulations and oth-

er, gene rally recognized safety-technical rules

must also be adhered to.

• The machine may only be used, maintained, and

operated by persons familiar with it and instructed

in its operation and procedures. Arbitrary altera-

tions to the machine release the manufacturer from

all responsibility for any resulting damages.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DECO-XL in the language / languages: English, German, Dutch, French, Italian, Polish, Finnish as an attachment in your email.

The manual is 4.38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DECO-XL Manual

Product: