Manual Scheppach CSD40-20Li (page 20 of 88) (English, German, French, Polish)

782591

Zoom out

Zoom in

1/88

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

20 | GB

cal power tools.

f) Keep cutting tools clean and sharp. Carefully main-

tained cutting tools with sharp cutting edges are less

likely to jam and are easier to control.

g) Use the electrical power tool, accessories, insert-

ed tools etc. in accordance with these instructions

and advice, and

the stipulations drawn up for this particular type of

device. In doing this, take into account the working

conditions

and the task in hand. The use of electrical power tools

for purposes other than those intended can lead to

dangerous situations.

Safety advice relating to cordless drill drivers

Hold the device by the insulated handle surfaces

when you are undertaking work where there is the

danger of the screw striking hidden electricity cables

or the device’s mains lead. Contact of the screw with

a live wire could cause metal parts of the device to

become live and lead to electric shock.

Children or persons who lack the knowledge or expe-

rience to use the device or whose physical,

sensory or intellectual capacities are limited must

never be allowed to use the device without

supervision or instruction by a person responsible for

their safety. Children must never be allowed to play

with the device.

Securely support the workpiece. A workpiece held in

a clamp or vice is kept more securely in

place than one held by your hand.

POISONOUS DUSTS!

Harmful / noxious dusts generated from your work

represent a risk to the health of the person

operating the device and to anyone near the work

area. Wear safety glasses and a dust mask!

Do not drill any material containing asbestos. Asbes-

tos is a known carcinogen.

Hold the electrical power tool rmly. High reaction

torques may occur momentarily during tightening or

loosening of screws.

If the inserted tool jams, switch off the electrical pow-

er tool immediately. Be prepared for high reaction tor-

ques as they may cause kickback. The inserted tool

may jam if the electrical power tool is overloaded or is

held at an angle to the workpiece.

Before you carry out any tasks on the device, trans-

port or store it, make sure that the direction of rotation

switch is in the middle position (lock). To prevent the

device from starting up unintentionally.

Attention - Service lines!

Danger ! Take steps to ensure that you do not hit

upon any service lines (electricity, gas, water) when

working with electrical appliances. Check, if need be

with a service line detector, before you start to cut or

wear safety glasses. The wearing of personal protec-

tive equipment such as dust masks, non-slip safety

shoes, safety helmets or ear protectors, appropriate

to the type of electrical power tool used and work un-

dertaken, reduces the risk of injury.

c) Avoid unintentional operation of the device. Check

that the electrical power tool is switched off before

you connect it to the mains, pick it up or carry it. Ac-

cidents can happen if you carry the device with your

nger on the ON / OFF switch or with the device

switched on.

d) Remove any setting tools or spanners before you

switch the device on. A tool or spanner left attached

to a rotating part of a device can lead to injury.

e) Avoid placing your body in an unnatural position.

Keep proper footing and balance at all times. By do-

ing this

you will be in a better position to control the device in

unforeseen circumstances.

f) Wear suitable clothing. Do not wear loose clothing

or jewellery. Keep your hair, clothing and gloves clear

of moving parts. Loose clothing, jewellery or long hair

can become trapped in moving parts.

g) If vacuum dust extraction and collection devices

are tted do not forget to check that they are properly

connected and correctly used. The use of these de-

vices reduces the hazard presented by dust.

4. Careful handling and use of electrical power tools

a) Do not overload the device. Always use an elec-

trical power tool that is intended for the task you are

undertaking.

By using the right electrical power tool for the job you

will work more safely and achieve a better result.

b) Do not use an electrical power tool if its switch is

defective. An electrical power tool that can no longer

be switched on and off is dangerous and must be re-

paired.

c) Pull the mains plug from the socket before you

make any adjustments to the device, change acces-

sories or when

the device is put away. This precaution is intended to

prevent you from unintentionall starting the device.

d) When not in use always ensure that electrical pow-

er tools are kept out of reach of children. Do not let

anyone use

the device if he or she is not familiar with it or has

not read the instructions and advice. Electrical power

tools are dangerous when they are used by inexperi-

enced people.

e) Look after the device carefully. Check that moving

parts are working properly and move freely. Check

for any

parts that are broken or damaged enough to detri-

mentally affect the functioning of the device. Have

damaged

parts repaired before you use the device. Many acci-

dents have their origins in poorly maintained electri-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CSD40-20Li in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach CSD40-20Li Manual

Product: