Manual Scheppach CSD40-20Li (page 18 of 88) (English, German, French, Polish)

782591

Zoom out

Zoom in

1/88

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

18 | GB

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

2. Device description (Fig. 1, 2)

1 Gear selector switch

2 Direction of rotation switch / lock

3 ON / OFF Switch / R.P.M. regulator

4 -

5 Belt clip

6 Rechargeable battery pack

7 Battery pack release button

8 -

9 -

10 -

11 -

12 LED-light

13 Drill chuck

14 Torque pre-selector

15 F ast charger

3. Technical data

Cordless drill:

Nominal voltage: 20 V

Idle-running speed: 1st gear: max. 450 min-1

Idle-running speed: 2nd gear: max. 1600 min-1

Drill chuck

clamping range: max. 13 mm

Max. torque: 40 Nm

Battery Pack:

Type: LITHIUM-ION

Nominal voltage: 20 V

Capacity: 2,0 Ah

Energy content: 40 Wh

Fast Charger:

INPUT

Nominal voltage: 220 - 240 V∼, 50 - 60 Hz

OUTPUT

Nominal voltage: 20 V

Charging current 4 A

Subject to technical changes!

Noise and vibration

m Warning: Noise at the workplace can exceed 85

dB (A). In this case, noise protection measures are

necessary for the user (wear hearing protection!).

Noise output in dB

sound power level LWA 76,18 dB(A) (EN ISO

3744)

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working ex-

perience with your new scheppach machine.

Note:

According to the applicable product liability law the

manufacturer of this device is not liable for damages

which arise on or in connection with this device in

case of:

• improper handling,

• non-compliance with the instructions for use,

• repairs by third party, non authorized skilled work-

ers,

• installation and replacement of non-original spare

parts,

• improper use,

• failures of the electrical system due to the

non-compliance with the electrical specications

and the VDE 0100, DIN 57113 / VDE 0113 regu-

lations

Recommendations:

Read the entire text of the operating instructions pri-

or to the assembly and operation of the device.

These operating instructions are intended to make it

easier for you to get familiar with your device and uti-

lize its intended possibilities of use.

The operating instructions contain important notes

on how to work safely, properly and economically

with your machine and how to avoid dangers, save

repair costs, reduce downtime, and increase the reli-

ability and working life of the machine.

In addition to the safety regulations contained herein,

you must in any case comply with the applicable reg-

ulations of your country with respect to the operation

of the machine.

Put the operating instructions in a clear plastic fold-

er to protect them from dirt and humidity, and store

them near the machine. The instructions must be

read and carefully observed by each operator prior

to starting the work. Only persons who have been

trained in the use of the machine and have been in-

formed on the related dangers and risks are allowed

to use the machine. The required minimum age must

be met.

In addition to the safety notes contained in the pres-

ent operating instructions and the special regulations

of your country, the generally recognized technical

rules for the operation of wood working machines

must be observed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CSD40-20Li in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach CSD40-20Li Manual

Product: