781444

Scheppach CMT200-20ProS Manual

22
Zoom out
Zoom in
Previous page
1/80
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
22 | GB
Removing the rechargeable battery pack:
Press the release button (4) and remove the re-
chargeable battery pack.
Used batteries
If a fully recharged battery lasts for considerably
shorter operating times, the battery is used up and
needs to be replaced. Only use an OEM battery pack
replacement available from our Customer Service.
Switching on and off
To switch on the machine, slide the slide switch to
position “I (ON)”.
To switch off the machine, slide the slide switch to
position “O (OFF)”.
Adjusting the number of pendulum strokes (Fig.
1)
The number of pendulum strokes is adjustable. To
change the number of pendulum strokes, turn the ad-
justing dial between 1 and 6. The higher the number,
the higher the number of pendulum strokes. Before
starting work, set the adjusting dial to the appropriate
number for your workpiece.
NOTE:
The adjusting dial cannot be turned directly from 1 to
6 or from 6 to 1. Continuing to turn the adjusting dial
by force may damage the machine. If you change the
direction of rotation of the adjusting dial, always move
it through all intermediate positions.
12. Operation
WARNING:
• Keep hands and face away from the application tool
before starting the machine and during operation .
Caution
• Do not exert excessive pressure on the machine as
this may cause the motor to block and the machine
to stop.
Cutting, sawing and scraping
CAUTION:
• Do not force the machine in the direction of use
(e.g. to both sides) without a cutting edge. This can
damage the machine.
• Set the application tool on the workpiece. Then
push the machine forward so that the movement of
the application tool does not slow down.
NOTE:
• Violent feeding or excessive pressure on the ma-
chine can reduce the performance of the work.
• Before starting cutting work, it is recommended to
preset the pendulum stroke number to 4 - 6.
• Remove sawdust by pulling the tool accordingly.
This improves work performance.
• The circular saw is recommended for cutting long
straight lines.
Sanding
CAUTION:
• Use sandpaper that has been used to sand metal,
not wood.
• Do not use worn sandpaper or sandpaper without
grit. Bring the sandpaper into contact with the work-
piece.
NOTE:
• A grinding sample on a test material is recommend-
ed in order to determine the pendulum stroke num-
ber suitable for your work.
• Use sandpaper with the same grain size until sand-
ing of the whole workpiece is nished. If the sand-
paper grain size is changed during work, a ne sur-
face nish may not be obtained.
13. Cleaning
Danger!
Always pull out the battery pack before starting any
cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
• We recommend that you clean the device immedi-
ately each time you have nished using it.
• Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep into
the device. The ingress of water into an electric tool
increases the risk of an electric shock.
14. Storage
Store the device and its accessories in a dark, dry
and frost-proof place that is inaccessible to children.
The optimum storage temperature is between 5 and
30˚C. Store the electrical tool in its original packag-
ing. Cover the electrical tool in order to protect it from
dust and moisture. Store the operating manual with
the electrical tool.
15. Maintenance
There are no parts inside the equipment which re-
quire additional maintenance.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach CMT200-20ProS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CMT200-20ProS in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 3.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info