781444

Scheppach CMT200-20ProS Manual

21
Zoom out
Zoom in
Previous page
1/80
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 21
Noise output in dB
Sound power level LWA 95 dB(A) (EN ISO 3744)
Sound pressure level LpA 84 dB(A) (EN ISO 11201)
Uncertainty Kwa/pA 3 dB(A)
Vibrationskennwerte
No load
Vibration ah 9,3 m/s²
Uncertainty Kh 1,5 m/s²
Grinding
Vibration ah 3.9 m/s²
Uncertainty Kh 1,5 m/s²
9. Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage. Inform the transport agent immediately of
any faults. Later complaints cannot be considered.
• If possible, store the packaging until the warranty
period has expired.
• Familiarize yourself with the machine with the help
of the operating instructions manual before using it.
• Use only original parts for accessories as well as
consumables and spare parts. Spare parts can be
obtained from your scheppach retailer.
• Please quote our article numbers as well as type
and production year in all your orders.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, lm and small parts! There is a risk of
swallowing and suffocation!
10. Assembly
CAUTION:
• Always make sure that the machine is switched off
and the battery removed before carrying out any
work on the machine.
Fitting and removing the application tool (Figs.
2 and 3 )
WARNING:
• Do not t the application tool upside down. If an
application tool is tted the wrong way round, it can
damage the machine and cause serious injury.
• Fit the application tool in the correct direction ac-
cording to the work to be done. The application tool
can be tted in positions offset by 30 degrees.
CAUTION:
• Be careful when closing the locking lever. The lock-
ing lever may suddenly close and pinch a nger.
• The moving part of the locking lever must be reg-
ularly cleaned of dust and lubricated. Otherwise,
dust may accumulate on the moving part of the
locking lever and impede its smooth movement.
• Do not start the tool while the lever is opening. Oth-
erwise the tool may be damaged.
1) Open the locking lever fully. And remove the re-
taining screw.
2) Place the application tool (optional accessory) on
the tool ange so that the protrusions of the tool
ange t into the holes of the application tool.
3) Insert the retaining screw as far as it will go. Then
return the locking lever to its original position.
If using an application tool for sanding, t the ap-
plication tool to the sanding pad so that it matches
the direction of the pad. The sanding pad features a
Velcro t system that allows comfortable and quick
application of sandpaper. Since sandpaper has holes
for dust extraction, t the sandpaper so that its holes
coincide with those in the sanding pad. To remove the
sandpaper, lift its edge and remove the paper.
To remove the retaining screw, use the assembly pro-
cedure in reverse.
If using application tools with a different type of in-
stallation part, select a correct adapter (optional ac-
cessory).
11. Installation
To ensure that the Li battery pack provides long ser-
vice you should take care to recharge it promptly. You
must recharge the battery pack when you notice that
the power of the cordless equipment drops.
Always make sure that the machine is switched off
before inserting the battery into the machine.
Insertion / removal of a batterypack into the ap-
pliance
Ensure that the appliance is switched off before in-
serting the battery. The insertion of a battery into an
electrical appliance that is switched on can lead to
accidents.
Inserting the rechargeable battery pack:
Move the rotation switch (2) into the middle position
(lock) and push the rechargeable battery pack (5) into
the handle until it engages.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach CMT200-20ProS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CMT200-20ProS in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 3.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info