Manual Scheppach CJS254-20ProS (page 17 of 72) (English, German, French, Polish)

781465

Zoom out

Zoom in

1/72

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 17

Additional Safety Warnings

Safety instructions for reciprocating saws

• When performing work during which the elec-

trical tool can meet with concealed power lines

or its own power cord, hold the electrical tool

by the insulated handle surfaces. Contact with a

live power line can also electrify metal device parts

and lead to an electric shock.

• Fasten and secure the workpiece to a stable

base using clamps or other means. If the work-

piece is held only by hand or against the body, it re-

mains unstable, which may result in a loss of control.

Safety advice relating specically to this device

Avoiding the danger of injury, re and damage to your

health:

• Securely support the workpiece. Use clamps or a

vice to grip the workpiece rmly. This is much safer

than holding it in your hand.

• Always switch on the electrical power tool before

placing it against the workpiece. There is also the

risk of kickback.

• Keep your hands away from the area of the saw

blade. Do not grip the underside of the workpiece.

Contact with the saw blade (10) may result in the

risk of injury.

• Make sure that the base plate (7) lies on the work-

piece when sawing.

• If a dangerous situation arises, pull the mains plug

immediately out of the mains socket.

• Always work with the mains lead leading away from

the rear of the device.

Warning! Noxious fumes!

Working with harmful / noxious dusts represents a

risk to the health of the person operating the device

and to anyone near the work area. Wear protective

glasses and a dust mask!

• Do not saw materials containing substances harm-

ful to health.

• Do not saw materials containing asbestos. Asbes-

tos is a known carcinogen.

• When sawing wood and in particular when working

on materials that give rise to dusts that are hazard-

ous to health, the device must be connected to a

suitable dust extraction device.

• Make sure you have adequate ventilation.

• Do not work on moistened materials or damp sur-

faces.

• Switch off the electrical power tool after completing

each stage of work but do not withdraw the saw blade

(10) from the cut until after it has come to a standstill.

• After switching off do not brake the saw blade (10)

by pressing it sideways against an object. It could

cause the saw blade (10) to be damaged, break or

initiate a kickback.

4. Careful handling and use of electrical power

tools

a. Do not overload the device. Always use an

electrical power tool that is intended for the

task you are undertaking. By using the right

electrical power tool for the job you will work more

safely and achieve a better result.

b. Do not use an electrical power tool if its switch

is defective. An electrical power tool that can no

longer be switched on and off is dangerous and

must be repaired.

c. Pull the mains plug from the socket before you

make any adjustments to the device, change

accessories or when the device is put away.

This precaution is intended to prevent you from

unintentionall starting the device.

d. When not in use always ensure that electrical

power tools are kept out of reach of children.

Do not let anyone use the device if he or she

is not familiar with it or has not read the in-

structions and advice. Electrical power tools

are dangerous when they are used by inexperi-

enced people.

e. Look after the device carefully. Check that

moving parts are working properly and move

freely. Check for any parts that are broken

or damaged enough to detrimentally affect

the functioning of the device. Have damaged

parts repaired before you use the device.

Many accidents have their origins in poorly main-

tained electrical power tools.

f. Keep cutting tools clean and sharp. Carefully

maintained cutting tools with sharp cutting edges

are less likely to jam and are easier to control.

g. Use the electrical power tool, accessories,

inserted tools etc. in accordance with these

instructions and advice, and the stipulations

drawn up for this particular type of device. In

doing this, take into account the working con-

ditions and the task in hand. The use of elec-

trical power tools for purposes other than those

intended can lead to dangerous situations.

h. Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the power tool in un-

expected situations.

5) Service

a. Have your power tool repaired by qualied

specialists only, and always use original

spare parts for repair. This is to maintain the

safety of the power tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CJS254-20ProS in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 3.01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach CJS254-20ProS Manual

Product: