Manual Scheppach CJS25-20Li (page 23 of 80) (English, German, French, Polish)

782516

Zoom out

Zoom in

1/80

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

23 | GB

Setting the speed

• Set the desired speed using the oscillation speed

setting

• If possible always determine the optimum setting

beforehand by carrying out a practical test.

Setting the pendulum action

You can set the pendulum movement of the saw

blade (14) using the pendulum action switch (12). By

having no pendulum action (setting “0”) you can pro-

duce ne, clean cut edges. Turn off the pendulum

action for thin workpieces. With the pendulum ac-

tion activated (settings 1 – 3) you can cut through the

workpiece at increasingly quicker rates..

• If possible always determine the optimum setting

beforehand using a practical test.

Switching on:

• Push the ON / OFF switch (2) into position “I” and

ensure it engages.

Switching off:

• Press the rear part of the ON / OFF switch (2).

To ensure that the Li battery pack provides long ser-

vice you should take care to recharge it promptly.

You must recharge the battery pack when you notice

that the power of the cordless equipment drops.

Electrical connection

The electrical motor installed is connected and ready

for operation. The connection complies with the ap-

plicable VDE and DIN provisions.

The customer‘s mains connection as well as the ex-

tension cable used must also comply with these reg-

ulations.

Damaged electrical connection cable

The insulation on electrical connection cables is of-

ten damaged.

This may have the following causes:

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insula-

tion damage.

Check the electrical connection cables for damage

regularly. Make sure that the connection cable does

not hang on the power network during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking „.

The printing of the type designation on the connec-

tion cable is mandatory.

11. Cleaning

Danger!

Always pull out the battery pack before starting any

cleaning work.

Cleaning

• Keep all safety devices, air vents and the motor

housing free of dirt and dust as far as possible.

Wipe the equipment with a clean cloth or blow it

with compressed air at low pressure.

• We recommend that you clean the device immedi-

ately each time you have nished using it.

• Clean the equipment regularly with a moist cloth

and some soft soap. Do not use cleaning agents

or solvents; these could attack the plastic parts of

the equipment. Ensure that no water can seep into

the device. The ingress of water into an electric tool

increases the risk of an electric shock.

12. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C. Store the electrical tool in its original packag-

ing. Cover the electrical tool in order to protect it from

dust and moisture. Store the operating manual with

the electrical tool.

13. Maintenance

There are no parts inside the equipment which re-

quire additional maintenance.

Connections and repairs

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the

event of any enquiries:

• Type of current for the motor

• Machine data - type plate

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CJS25-20Li in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach CJS25-20Li Manual

Product: