Manual Scheppach CJS25-20Li (page 20 of 80) (English, German, French, Polish)

782516

Zoom out

Zoom in

1/80

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

20 | GB

g) Use the electrical power tool, accessories,

inserted tools etc. in accordance with these in-

structions and advice, and the stipulations drawn

up for this particular type of device. In doing this,

take into account the working conditions and the

task in hand. The use of electrical power tools for

purposes other than those intended can lead to dan-

gerous situations.

8. Additional Safety Warnings

Safety advice relating specically to this device

Avoiding the danger of injury, re and damage to

your health:

• Securely support the workpiece. Use clamps or a

vice to grip the workpiece rmly. This is much safer

than holding it in your hand.

• Always switch on the electrical power tool before

placing it against the workpiece. There is also the

risk of kickback.

• Keep your hands away from the area of the saw

blade. Do not grip the underside of the workpiece.

Contact with the saw blade (14) may result in the

risk of injury.

• Make sure that the base plate (9) lies on the work-

piece when sawing.

• If a dangerous situation arises, pull the mains plug

immediately out of the mains socket.

• Always work with the mains lead leading away from

the rear of the device.

Warning! Noxious fumes! Working with harmful /

noxious dusts represents a risk to the health of the

person operating the device and to anyone near the

work area. Wear protective glasses and a dust mask!

• Do not saw materials containing substances harm-

ful to health.

• Do not saw materials containing asbestos. Asbes-

tos is a known carcinogen.

• When sawing wood and in particular when working

on materials that give rise to dusts that are hazard-

ous to health, the device must be connected to a

suitable dust extraction device.

• Make sure you have adequate ventilation.

• Do not work on moistened materials or damp sur-

faces.

• Switch off the electrical power tool after completing

each stage of work but do not withdraw the saw

blade (14) from the cut until after it has come to a

standstill.

• After switching off do not brake the saw blade (14)

by pressing it sideways against an object. It could

cause the saw blade (14) to be damaged, break or

initiate a kickback.

• Use only undamaged, defect-free saw blades. Dis-

work undertaken, reduces the risk of injury.

c) Avoid unintentional operation of the device.

Check that the electrical power tool is switched

off before you connect it to the mains, pick it up

or carry it. Accidents can happen if you carry the

device with your nger on the ON / OFF switch or with

the device switched on.

d) Remove any setting tools or spanners before

you switch the device on. A tool or spanner left at-

tached to a rotating part of a device can lead to injury.

e) Avoid placing your body in an unnatural po-

sition. Keep proper footing and balance at all

times. By doing this you will be in a better position to

control the device in unforeseen circumstances.

f) Wear suitable clothing. Do not wear loose

clothing or jewellery. Keep your hair, clothing

and gloves clear of moving parts. Loose clothing,

jewellery or long hair can become trapped in moving

parts.

g) If vacuum dust extraction and collection de-

vices are tted do not forget to check that they

are properly connected and correctly used. The

use of these devices reduces the hazard presented

by dust.

4. Careful handling and use of electrical power

tools

a) Do not overload the device. Always use an

electrical power tool that is intended for the task

you are undertaking. By using the right electrical

power tool for the job you will work more safely and

achieve a better result.

b) Do not use an electrical power tool if its switch

is defective. An electrical power tool that can no

longer be switched on and off is dangerous and must

be repaired.

c) Pull the mains plug out of the socket before

you make any adjustments to the device, change

accessories or when the device is put away. This

precaution is intended to prevent you from uninten-

tionally starting the device.

d) When not in use always ensure that electrical

power tools are kept out of reach of children. Do not

let anyone use the device if he or she is not familiar

with it or has not read the instructions and advice.

Electrical power tools are dangerous when they are

used by inexperienced people.

e) Look after the device carefully. Check that mov-

ing parts are working properly and move freely.

Check for any parts that are broken or damaged

enough to detrimentally affect the functioning of

the device. Have damaged parts repaired before

you use the device. Many accidents have their ori-

gins in poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp. Carefully

maintained cutting tools with sharp cutting edges are

less likely to jam and are easier to control.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CJS25-20Li in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach CJS25-20Li Manual

Product: