782495
17
Zoom out
Zoom in
Previous page
1/122
Next page
english 15
• Donotremovescrapsorwastewoodfromtheareaof
sawing as long as the machine is running.
• Neverstandonthemachine.Thiscouldleadtoserious
injuriesshouldittiporapersoncomeincontactwith
the saw blade.
Use work gloves
Useprotectivemasksandglasses.
Useearandhearingprotection.
Environmental Protection
Send those materials that are no longer needed to recy-
cling. All tools, tubing, and packaging should be sorted
and disposed of according to responsible environmental
policyinthelocalrecyclingcentre.
Appropriate Use
The machine is produced according to the relevant European
Union machine guidelines
• Themachineisconstructedsolelytobeusedwiththe
giventoolsandaccessoriesfortheprocessingofwood.
• The machine is constructed for single shift use. The
lengthofoperationissixhoursto40%.
• Allsafetyandhazardinstructionsonthemachineareto
be followed.
• Allsafetyandhazardinstructionsonthemachineareto
bekeptinalegiblecondition.
• Whenthemachineisusedinaclosedroomitmustbe
connected to a dust collection unit.
• Adustcollectingunitistobeusedtocollectsawdustor
woodchips.Theintakeowofthecollectingunitmust
be20m/s.Negativepressure1200Pa.
• Forworkinacommercialsettingadustminimisermust
be used.
• Dustcollectingunitsordustminimizingunitsshouldnot
be turned off or removed when the machine is running.
• Usethismachineonlywhenitisinatechnicallyperfect
condition as well as according to all relevant regulations
ofappropriateuse,safetyandinjuryawareness,aswell
asfollowingallinstructionsforuse.Inparticular,those
difcultieswhichinuencethesafeoperationofthema-
chine must be immediately dealt with!
• Themanufacturer’ssafety,workandmaintenanceguide-
lines as well as the technical data regarding measure-
ments must be adhered to.
• The appropriate measures for avoiding accidents and
other generally recognized safety rules must also be ad-
hered to.
• Themachinemayonlybeused,maintainedorrepaired
byexperiencedpersonswhounderstandthemachineand
areinformedaboutthehazards.Independentchangesin
themachinevoidthemanufacturer’sguaranteeandex-
clude the manufacturer from damage which results.
• Themachinemayonlybeusedwithoriginalpartsand
original tools from the manufacturer.
• Anyuseaboveandbeyondthisisnotappropriatetothe
machine.Themanufacturerdoesnottakeanyresponsi-
bility for damage resulting there from; any and all risks
arebornebytheoperator.
m Residual Risks
The machine is built according to the current technical stand-
ards and the recognized safety technical rules. Still several
residual risks remain which can result when the machine is
operated.
• Dangerofinjurytongersandhandsduetotherotating
planingdeviceshouldmaterialsbeintroducedintothe
machineinaninexpertmanner.
• Dangerduetomaterialswhicharethrownoffofthema-
chineduetoinexpertfasteningorintroductionintothe
machine,aswellasworkwithoutaprotectiveguard.
• Healthhazardsduetosawdustorwoodshavings.
• Personalprotectivegearsuchasgogglesoradustmask
must be worn. Use a dust collecting unit.
• Healthhazards due tonoise. Whenthemachine isin
operationthenoiseexceedsthepermittednoiselevels.
Personalprotectiondevicessuchashearingprotection
should be worn.
• Dangerduetoelectricalcurrentshouldanonregulation
electrical connection be used.
• The machine should be used only on selected wood,
without defects such as knots, lateral cracks, surface
cracks. Defective wood becomes a risk factor in machine
use.
• Forthisreason,inspiteofhavingattendedtoallprotec-
tive measures there may be residual risks which are not
evident.
• Residual risks can be minimized when the safety in-
structionsandappropriateuseaswellastheoperating
instructions are followed.
Transportation
Fortransportationorstorageofthemitreboxsawthesaw
headmustalwaysbexedinthelowestposition:
• Usetheblockinglever(4)andpushthesawhead(1)as
far down as it will go
• Bypressingthesafetypeg (2)lockthesawhead(g.
3)
Blocking the saw head (fig. 3)
Warning: To avoid injury and damage to the saw, transport
or store the mitre box saw with the saw head all the way
down. Never use the safety peg to hold the saw head in a
downward position.
Equipment, fig. 1
1 motor
2 uppersawbladeprotector
3 carrying handle
4 sawheadgrip
5 on/offswitch
6 blockinglevergrip
7 lowersawbladeprotector
8 table covering
9 mitreboxgrip
10 clamplever
11 saw blade
12 work angle indicator
13 machine body
14 positiveslantadjustment
15 assembly holes
16 rotating table
17 left table extension
18 blade chock
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Capas 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Capas 5 in the language / languages: All languages as an attachment in your email.

The manual is 9.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info