Manual Scheppach BGS700 (page 20 of 136) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

781662

Zoom out

Zoom in

1/136

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

grinding wheel thickness mm 20

ø grinding wheel hole mm 12.7

max. circumferential speed m/s 23

belt speed m/min 895

grinding /sanding belt L x W

mm 686 x 50

weight kg 10.2

drive

rated voltage V/Hz 230/50

power rating 370W S2 30min

idle speed n0 min-1 2850

Load factor:

A load factor of S2 30 min (intermittent periodic duty)

means that you may operate the motor continuously

at its nominal power level (230 W) for no longer than

30 minutes ON period. If you fail to observe this time

limit the motor will overheat. During the OFF period

the motor will cool again to its starting temperature.

INoise

Sound values were measured in accordance with

EN 61029.

Sound pressure level LpA 82.3 dB(A)

Uncertainty KpA 3 dB

Sound power level LWA 91.5 dB(A)

Uncertainty KWA 3 dB

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Limit the noise to a minimum!

• Only use appliances which are in perfect wor-

king order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever neces-

sary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

7. Before operation

Before you connect the equipment to the mains

supply make sure that the data on the rating plate

are identical to the mains data.

Always pull the power plug before making ad-

justments to the equipment.

• The machine must be set up so that it stands

rmly, i.e. it must be securely screwed to a work

bench or similar.

• The grinder should be xed permanently at a

suitable place. To attach the grinder to a hard

and at surface, there are two mounting points

on the grinder. The tool support should be

approximately at the height of your elbow. The

working area is in front of the machine - keep it

free of obstacles.

• All covers and safety devices have to be proper-

ly tted before the equipment is switched on.

5 Use only clamping anges of identical size and

identical shape to mount the grinding wheels.

The intermediate layers between the clamp-

ing ange and the grinding wheel must be

comprised of elastic materials, e.g. rubber, soft

cardboard, etc.

6 Never enlarge a grinding wheels’ mounting hole

by subsequent drilling.

7 The workpiece supports and the top adjustable

safety guards must always be moved as close

as possible to the grinding wheel (max. 2 mm

clearance).

8 Grinding wheels are not allowed to be used

without the safety device. The following clear-

ances must not be exceeded:

- Workpiece support/grinding wheel: max. 2 mm

- Safety guard/grinding wheel: max. 2 mm

9 The guard holder, workpiece support and trans-

parent guard must be tted before the double

grinder is used.

10 The power plug must be pulled out before chan-

ging the grinding wheel.

11 The max. circumferential speed of the dry grin-

ding wheel is: 23 m/s m/s = (d x 3.14 x n) / (60 x

1000)

d = diameter of the grinding wheel in mm

n = motor revolutions per minute

12 Max. permitted motor housing temperature:

80°C

13 Before starting work, rmly screw the grinder to

the workbench by using the 2 mounting points

on the base plate.

14 Adjust the spark deector periodically in order to

compensate the wear of the wheel. Please note

that the distance between the spark deector

and the wheel is to be kept as small as possible

and should in no case exceed 2 mm.

15 The grinding wheel must be replaced at the

latest when the spark deector and the workpi-

ece support can no longer be set a maximum

distance of 2 mm from the grinding wheel.

16 Process only work pieces, which can be held

in position safely. Processing very small work

pieces will increase the risk injuries. Longer

work pieces must be supported by using a roller

stand (optional equipment) or the like.

Residual risks

Even if you use this electric power tool in

accordance with instructions, certain residual

risks cannot be ruled out. The following hazards

may arise in connection with the equipment’s

construction and layout:

• Lung damage if no suitable protective dust mask

is used.

• Damage to hearing if no suitable ear protection

is used.

• Health damage caused by hand-arm vibrations

if the equipment is used over a prolonged period

or is not properly guided and maintained.

Keep this safety information in a safe place.

6. Technical data

dimensions L x W x H mm 360 x 280 x 335

ø grinding wheel mm 150

20 / 136

FR CZ SK DK ES FIN IT NL PL PT SE SI NO

GBDE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BGS700 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6.01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach BGS700 Manual

Product: