781662
17
Zoom out
Zoom in
Previous page
1/136
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
2. Device description (Fig. 1-3)
1 Safety glass
2 Spark deector
3 Spark deector adjusting screw
4 Fastening screw Safety glass holder
5 Guard hood
6 Grinding wheel
7 Workpiece support star screw
8 Workpiece support
9 Grinding / sanding belt
10 Belt guidance adjustment screw
11 Clamp screw for the top belt roller
12 Fastening screw for side cover
13 Side cover
14 Mounting point
15 Foot
16 On/Off switch
17 Coolant reservoir
18 Fastening screw for workpiece support
3. Scope of delivery
Grinder/Sander (1)
Instruction manual (1)
Sanding disc (1)
Sanding belt (1)
Grinding wheel dresser (1)
Waranty sticker (1)
Open the packaging and remove the device
carefully.
Remove the packaging material as well as the
packaging and transport bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for trans-
port damage.
If possible, store the packaging until the warran-
ty period has expired.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, lm and small parts! There is a risk of swal-
lowing and suffocation!
4. Intended use
The grinder/sander is a combination device for the
coarse and ne grinding/sanding of metals, woods
of all kinds and other materials using the appropriate
grinding/sanding wheel or belt.
The machine may only be used with grinding/san-
ding wheels or belts which are suitable for it and
comply with the characteristic data in these instruc-
tions.
The machine is allowed to be used only for its
intended purpose! Even when the equipment is used
as prescribed it is still impossible to eliminate certain
residual risk factors. The following hazards may
arise in connection with the machine’s construction
and layout:
Contact with the grinding wheel where it is not
covered.
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope you have a lot of fun and success using your
new machine.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
improper handling,
noncompliance of the operating instructions,
repairs by third parties, not by authorized service
technicians,
installation and replacement of non-original spare
parts,
non-intended use,
A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
that you read through the entire operating instruc-
tions before putting the machine into operation.
These operating instructions are to assist you in get-
ting to know your machine and utilize its proper ap-
plications. The operating instructions contain impor-
tant notes on how you work with the machine safely,
expertly, and economically, and how you can avoid
hazards, save repair costs, reduce downtime and in-
crease the reliability and service life of the machine.
In addition to the safety requirements contained in
these operating instructions, you must be careful to
observe your countrys applicable regulations.
The operating instructions must always be near the
machine. Put them in a plastic folder to protect them
from dirt and humidity. They must be read by every
operator before beginning work and observed con-
scientiously. Only persons who have been trained in
the use of the machine and have been informed of
the various dangers may work with the machine. The
required minimum age must be observed. In addition
to the safety requirements in these operating instruc-
tions and your country’s applicable regulations, you
should observe the generally recognized technical
rules concerning the operation of identically con-
structed devices.
17 / 136
FR CZ SK DK ES FIN IT NL PL PT SE SI NO
GBDE
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach BGS700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BGS700 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info