Manual Scheppach BCH5300BP (page 30 of 84) (English, German, Dutch, French, Italian, Polish)

781392

Zoom out

Zoom in

1/84

30 GB

Warning! Take extreme care during mowing work.

When doing such work keep a distance of 30 meters

between yourself and other people or animals.

Mowing

When mowing, you want to cut all the vegetation

down to the ground. To do this, set the line spool at

an angle of 30° to the right. Place the handle in the

required position. Remember the increased risk of in-

jury to the user, watchers and animals, and the dan-

ger of damaging property due to objects (for example

stones) being thrown.

Warning! Do not use the equipment to remove ob-

jects from footpaths, etc. The equipment is a power-

ful tool and can throw small stones and other objects

a distance of 15 meters or more, causing injuries and

damage to cars, houses and windows.

Jamming

If the cutting blade jams as a result of attempting to

cut vegetation that is too dense, switch off the engine

immediately. Remove the grass and scrub from the

equipment before you restart it. Fig. 49

Preventing recoil

When you work with the blade, there is a risk of recoil

if it strikes solid objects such as tree trunks, branch-

es, tree stumps, stones or the like. This will throw the

equipment backwards in the direction opposite to

the rotation of the tool. This can cause you to lose

control of the equipment. Do not use the blade near

fences, metal posts, boundary stones or foundations.

10. Maintenance

Before performing any maintenance or cleaning

work, always turn off the engine and pull out the

spark boot plug.

1. Do not spray the unit with water. It damages the

engine.

2. Clean the unit with a cloth, hand brush, etc.

Maintenance schedule

12 hours of

use 24 hours of

use 36 hours of use

Air lter clean clean replace

Spark plug check clean replace

Expert inspection is required:

• If the brush cutter strikes an object.

• If the motor stops suddenly

• If the blade is bent (do not align!)

• If the gears are damaged.

Replacing the line spool/cutting line Fig. 41 - 46

1. Dismantle the line spool (1) as described in sec-

tion 8.3 Assembly. Press the spool together and

remove one half of the housing. Fig. 42

2. Take the spool plate out of the line spool housing.

Fig. 43

3. Remove any remaining cutting line.

4. Place the new cutting line in the center and hang

the loop which has formed into the recess in the

spool splitter. Fig. 44

5. Wind the line onto the spool counter-clockwise

and under tension. The spool splitter will sepa-

rate the two halves of the line. Fig. 45

6. Hook the last 15cm of the two ends of the line

onto the opposite lying line holders of the spool

plate. Fig. 46

7. Thread the two ends of the line through the metal

eyelets in the line spool housing .

8. Press the spool plate into the line spool housing.

Fig. 43

9. Pull the two line ends sharply to release them

from the line holders.

10. Join the housing parts together again. Fig. 42

11. Cut the excess line to a length of around 13cm.

This will reduce the load on the engine when

starting and warming up.

12. Remount the line spool (see section 8.3). If you

are replacing the complete line spool, skip points

3-6.

Grinding the safety hood blade Fig. 24 (A)

The safety hood blade can become blunt over time.

• When you notice this, undo the screw holding the

safety hood blade on the safety hood.

• Clamp the blade in a vise.

• Sharpen the blade with a at le and make sure

that the angle of the cutting edge is not altered in

the process. File in one direction only.

• Important! Reassemble the cutting knife.

Replacing and resharpening the cutting blade at the

end of the mowing season always resharpen the cut-

ting blade or, if required, replace the cutting blade

with a new one.

Grinding cutter blade (4)

If the blade is only slightly dull, they can re-sharpen

themselves.

• Clamp the blade in a vise.

• Sharpen the blade with a at le and make sure

that the angle of the cutting edge is not altered in

the process. (~25°) File in one direction only.

Replace the blade at the latest after ve times sharp-

ening.

Replace the blade with heavy wear or broken blade.

Unbalanced blades will cause the brush cutter to vi-

brate violently-risk of accident!

Change and clean the spark plug Fig. 35 - 36

1. Once the engine has cooled, remove the spark

plug using the socket spanner supplied.

2. Clean the plug with a wire brush.

3. Using a feeler gauge; set the gap to 0.5-0.7 mm.

4. Install the spark plug carefully by hand, to avoid

cross-threading.

5. After the spark plug is seated, tighten with span-

ner to compress the washer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BCH5300BP in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 7.53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach BCH5300BP Manual

Product: