Manual Scheppach Basa 5.0 (page 30 of 148) (All languages)

781468

Zoom out

Zoom in

1/148

We recommend:

• The swinging segments of the bench, the saw-

band tensioning unit and the guide of the cutting

height adjustment unit must always move easily.

Treat these parts with a lubricant spray when

necessary to maintain these functions.

• Clean the sawband regularly. Wood leaves resin

remnants which stick to the sawband and impair

working safety and performance.

• Keep the bench surface free of resin.

• Do not use cleaning agents or thinners which are

easily ammable or which emit harmful vapors to

clean the sawband and bench.

Use the concentrated resin remover special

accessory.

• Check sawbands regularly for faults. Replace

faulty sawbands immediately.

• Check saw bench insert.

Replace wom saw bench insert.

• Rubber lining of the band wheels

The rubber lining of the band wheels becomes

ripped and worn by the metal sawband over time.

Exact sawband alignment is then no longer

possible. Working safety and performance are

impaired.

Replace the band wheels!

Replacement wheels can be ordered from your

scheppach dealer as with allother replacement

parts.

• Check the setting of the sawband guide regularly

and readjust it if necessary.

Remove the sawband guide for readjustment.

Troubleshooting

Failure Possible cause Solution

Motor does not start a) No current in the socket a) Check mains fuse

b) Switch or capacitor defective b) Have checked by electrician

c) Electrical extension line defective c) Pull mains plug, check, replace

d) Incorrect connection line 3~400 V d) 5-line connection, at 1,5 mm² diameter

e) Housing lid open (limit switch) e) Close housing lid exactly

Incorrect motor rotation direction Incorrect connection Reverse polarity of wall socket by electrician

Sawband slips or jumps down a) Upper band wheel a) Carry out side correction according to

Fig."9"

b) Saw band guide b) Set according to Fig. „10“ and „11“

c) Incorrect saw band c) Select according to table

d) Fence not parallel to sawband d) Set fence according to Fig. „4“

Burn marks on wood a) Sawband dull a) Replace sawband

b) Incorrect sawband b) Select according to table

c) Incorrect cutting speed c) Set cutting speed according to figure „6“

d) Fence not parallel to sawband d) Set fence according to Fig „4“

Sawband jams a) Sawband dull a) Replace sawband

b) Sawband sticky with resin b) Clean sawband

c) Saw band guide c) Set according to Fig. „10“ and „11“

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Basa 5.0 in the language / languages: All languages as an attachment in your email.

The manual is 4.84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Basa 5.0 Manual

Product: