782164

Scheppach Basa 4.0 Manual

14
Zoom out
Zoom in
Previous page
1/26
Next page
Use the special accessory Resin Remover
Concentrate.
• When exchanging the table insert, make sure
that the insert is at the same height as the
saw table.
• Regularly check the saw band for defects.
Replace defective saw bands immediately.
• Regularly check the saw table insert. Re-
place worn saw table inserts.
• Rubber bandage of the band wheels
The rubber bandage on the band wheels
becomes cracked and worn over time due
to the metal saw band. An exact saw band
run is therefore no longer possible. The work
safety and the work process are affected.
Exchange band wheels!
Obtain replacement band wheels, as well
as all other replacement parts through your
scheppach dealer.
• Regularly check the adjustment of the saw
band guide and reset it as needed. To adjust,
remove the saw band guide.
Troubleshooting
Problem Possible Causes Remedy
Motro does not turn on a) No power a) Check mains fuse
b) Switch, capacitor defective b) Have a qualified electrician check it
c) Electrical extension cord defective c) Remove mains fuse, check, exchange if needed
d) Wrong flex 3~400V Motor d) Flex 5-poled, at 1,5 mm² cross-section
e) Housing cober open (end switch) e) Close housing cover exactly
Motor turns the wrong direction Incorrect connection Change rotational direction at CEE plug
Saw band wanders or jumps
down
a) Upper band wheel a) Carry out side correction
b) Saw band guide b) Reinstall
c) Wrong saw band c) Select from scheppach catalogue
d) Longitudinal fence not parallel to saw band b) Adjust longitudinal fence
Scorch mark on wood during
work
a) Saw band dull a Replace saw band
b) Wrong saw band b) Select from scheppach catalogue
c) Wrong cutting speed c) Adjust cutting speed
d) Longitudinal fence not parallel to saw band d) Adjust longitudinal fence
Saw band jams during work a) Saw band dull a) Replace saw band
b) Saw band resined b) Clean saw band
c) Guide badly adjusted c) Readjust
If you have problems and cannot resolve them yourself, contact the customer service of the scheppach company.
14
DGB
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Basa 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Basa 4.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 2.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info