781880

Scheppach AB1500 Manual

23
Zoom out
Zoom in
Previous page
1/108
Next page
23
KUL
I tilfælde af stor gnistdannelse bør kullet kontrolleres af
en autoriseret elektriker.
Bemærk! Kul må kun udskiftes af en autoriseret elektriker.
PÅFØRING AF SMØREFEDT (FIG. 7,8)
Maskinen skal smøres med fedt, som skal påføres efter
ca. 50 driftstimer. Sluk for maskinen, og træk stikket ud
af stikdåsen.
• Løsn låseanordningen (6) vha. vedligeholdelses-
værktøjet (7).
• Fjern afdækningen på oversiden af maskinen.
• Smør alle tilgængelige mekaniske dele med ca. 50
g fedt.
• Spænd sekskantskruen fast igen.
RESERVEDELSBESTILLING
Ved bestilling af reservedele skal følgende oplysninger
afgives:
– Maskinens type
– Maskinens modelnummer
– Maskinens ID-nummer
– Den ønskede reservedels nummer
Bortskaffelse og genbrug
Emballeringen af forskellige råstoffer bør aeveres til
genbrug.Spørg din forhandler eller kommune.
Fejlnding
Fejl Mulig årsag Løsning
Motor vil ikke starte a) Sprunget sikring a) Kontroller sikring
b) Forlængerledning defekt b) Udskift forlængerledning
c) Tilslutninger ved motor eller stik
defekte c) lad en elektriker kontrollere defekten
d) Motor eller kontakt defekt d) lad en elektriker kontrollere defekten
Motor yder ikke nok, sikringer springer a) Forlængerledningens tværsnit er
ikke tilstrækkelig a) se elektrisk tilslutning
b) Overbelastning b) kontroller værktøj
CARBON BRUSHES
In case of excessive sparking, have the carbon brushes
checked by a qualied electrician.
Caution! The carbon brushes should be replaced only
by a qualied electrician.
ADD LUBRICATING GREASE (FIG.7, FIG.8)
The machine must be lubricated with the grease that is
provided after approximately 50 hours ofoperation.
Switch off the machine and pull the mains plug out of
the socket.
• Undo the hexagonal head screw using the spanner (7).
• Remove the cover on the top of the machine.
• Lubricate all the accessible mechanical parts with a
prox. 50 g of grease.
• Tighten the hexagonal screw again.
Important: The waste grease must be disposed of
in the appropriate collection point for waste grease.
ORDERING SPARE PARTS
When ordering spare parts, the following information
should be provided:
– Type of device
– Article number of device
– ID of the device
– Spare part number of the part required
Disposal and recycling
The packaging of various materials should be sent to
recycling. Consult your dealer or municipality.
Elimination of faults
Fault Possible cause Corrective action
Motor does not start a) Failure of mains fuse a) Check the mains fuse
b) Extension cable defective b) Replace defective extension cable
c) Connections at the motor or
switch out of order c) Check with the help of an electrician
d) Motor or switch defective d) Check with the help of an electrician
Motor does not work, the fuse re-
sponds a) Querschnitt der Verlängerungslei-
tung nicht ausreichend a) Refer to Electrical Connection
b) Overload b) Check tool
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach AB1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach AB1500 in the language / languages: English, German, Danish, French, Italian, Polish, Finnish as an attachment in your email.

The manual is 4.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info