Manual Scheppach AB1500 (page 17 of 108) (English, German, Danish, French, Italian, Polish, Finnish)

781880

Zoom out

Zoom in

1/108

• Lær din maskine at kende. Gør dig bekendt med

dens anvendelse og dens begrænsninger, men også

med de specikke potentielle farer.

• Kontroller at kontakten står på AUS inden stikket

sættes i strømkontakten.

• Sørg for at maskinen er ordentlig rengjort og smurt.

• Inden ibrugtagning skal du kontrollere maskinen for

beskadigede dele og afgøre, om delene fungerer

korrekt og opfylder deres funktion. I tvivlstilfælde

skal delen udskiftes.

• Kontroller alle bevægelige deles justering, alle knæk-

kede eller fastgørelsesanordninger og alt andet, der

kan påvirke den korrekte funktion. Alle beskadigede

dele skal straks repareres eller udskiftes af en fag-

mand.

• Brug ikke maskinen, hvis en kontakt ikke kan tændes

eller slukkes korrekt.

Bemærk! Inden arbejdet påbegyndes undersøges ar-

bejdsområdet for skjulte elektriske ledninger, gas- og

vandrør.

Drift

Brug kun maskinen uden fejl.

• Tving ikke maskinen eller tilbehøret til at udføre ar-

bejde som en større industriel maskine. Den yder

et bedre stykke arbejde med den kapacitet, den er

beregnet til.

• Foretag alle justeringer på slukket maskine.

• Lad ikke maskinen være uden opsyn, mens den

kører.

• Når maskinen slukkes, må du først forlade den, når

den er stoppet helt.

• Sluk altid for maskinen inden stikket tages ud.

• Tag altid stikket ud af stikkontakten. Træk ikke stikket

ud ved at trække i ledningen.

• Vedligehold og rengør maskinen regelmæssigt.

• Lad maskinen kontrollere, hvis det er nødvendigt.

Hvis du er usikker på om nogle arbejdsbetingelser

er sikre eller ej, så lad være med at arbejde med

maskinen.

UDSTYR FIG. 1

1. Håndtag

2. Tænd/sluk kontakt

3. Ekstra håndtag

4. Chuck låsning

5. Værktøjsholder

6. Oliepåfyldning

7. Unbraconøglen

• Get to know your machine. Familiarise yourself with

its application and limitations, as well as the specic

potential hazards.

• Make sure that the switch is OFF before inserting the

plug into the socket.

• Make sure that the machine is assembled completely

and properly.

• Check the machine before use for damaged parts

and determine whether these parts work properly

and perform its intended function; in case of doubt,

the part is to be replaced.

• Check the alignment of all moving parts, broken or

mounting parts, and other conditions that could im-

pair proper operation. Any damaged part should be

repaired or replaced by a qualied technician.

• Do not use the machine if a switch cannot be

switched on and off correctly.

Caution! Before beginning the operation, check the in-

stallation site for concealed electrical cables, gas and

water pipes using a pipe locator.

Operation

Use only proper equipment.

• Do not force the machine or accessory not to do the

work of a larger industrial machine. It works better at

the power rating for which it was designed.

• Make all machine adjustments only with the machine

switched off.

• Never leave the machine unattended while it is run-

ning.

• When switching off, leave the machine only after it

comes to a complete standstill.

• Turn the machine off before you unplug it.

• Always unplug the mains cord. Never pull out the

plug from the wall outlet by holding the cable.

• Perform maintenance and cleaning of the device

regularly.

• Have the device checked, if necessary.

If you are not sure whether a working condition is

safe or unsafe, do not work with the machine.

FEATURES FIG.1

1. Handle

2. On / Off switch

3. Additional handle

4. Bohrfutter-Verriebelung

5. Tool holder

6. Oil ll opening

7. Allen key

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach AB1500 in the language / languages: English, German, Danish, French, Italian, Polish, Finnish as an attachment in your email.

The manual is 4.53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach AB1500 Manual

Product: