Manual Schaub Lorenz 32LT655C (page 69 of 85) (English, German)

548579

Zoom out

Zoom in

1/85

English - 68 -

After factory settings are loaded, “First Time

Installation” menu will be displayed.

The menu which is displayed for language selection

appears on the screen at  rst. By using “ ” or “

” buttons, select the desired language option,

and press OK button to activate. After then, “First

time installation” OSD will appear on the screen.

By pressing “ ” or “ ” buttons, select the Country

you want to set and press OK button (* only for EU

countries). Next, active antenna mode selection OSD

will appear on the screen. Use “ ” or “ ” to set and

press OK to continue. See the section, “Initial Settings”

for more information. After active antenna mode option

is selected, a message asking for automatic search

appears on the screen:

Highlight “Yes” item by pressing “ ” or “ ” buttons

and press OK button to start installation. • To select

the “Yes” or “No” option, highlight the item by using “

” or “ ” buttons and press OK button.

After then, the following OSD will be displayed on

the screen:

If you select CABLE option, the following screen will

be displayed:

You can select frequency ranges from this screen. For

highlighting lines you see, use “ ” or “ ” button. You

can enter the frequency range manually by using the

numeric buttons on the remote control. Set Start and

Stop Frequency as desired by using numeric buttons

on the remote control. After this operation, you can set

Search Step as 8000 KHz or 1000 KHz. If you select

1000 KHz, the Tv will perform search process in a

detailed way. Searching duration will thus increase

accordingly. When  nished, press OK button to start

automatic search. Automatic searching screen will be

displayed during the process.

Note: If you select an extended gap between Start

and Stop frequency rate, automatic search duration

will take a longer time.

If you select AERIAL option from the Search Type

screen, the digital television will search for digital

terrestrial TV broadcasts:

The IDTV will automatically tune to the UHF or VHF

(** for EU countries) transmission channels, searching

for digital terrestrial TV broadcasts and displaying the

names of channels found. This process will take about

a few minutes. To cancel searching, you can press the

“MENU” button at any time during the process.

Note: If the digital TV fails to store any channels, “No

channels available.” message will be displayed on

the screen.

Either you select AERIAL or CABLE option from the

search type menu, after the digital automatic search

is completed, the following message asking for

analogue channel search appears on the screen:

Operation of analogue channel installation is explained

previously in “Initial Installation” section.

Media Browser (in DTV mode)

Whenever you plug a USB  ash disk to your TV, the

following message will be displayed on the screen:

Select YES or NO by pressing “ ” or “ ” button and

“OK” button to continiue.

You can also select Media Browser item from the

main menu by using “ ” or “ ” buttons. Press OK to

view Media Browser contents. You can play audio

and photo and video (optional)  les from a USB

 ash disk.

Note: Some USB compliant devices may not be

supported.

Note: Movie Sense and Pixellence features cannot

be set while in Media Browser mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz 32LT655C in the language / languages: English, German as an attachment in your email.

The manual is 14,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Schaub Lorenz 32LT655C Manual

Product: