548579

Schaub Lorenz 32LT655C Manual

68
Zoom out
Zoom in
Previous page
1/85
Next page
English - 67 -
Cable Installation
Select Cable Installation line in the Installation menu
and use OK button to view the menu contents:
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted. The following message appears on the
screen:
Highlight Yes or No by using “ ” or “ ” buttons
and press OK button to con rm. If Yes is selected,
automatic search starts. Selecting No cancels
automatic search.
You can select frequency ranges from this screen. For
highlighting the lines you see, use “ ” or “ ” button.
You can enter the frequency range manually by using
the numeric buttons on the remote control. Set Start
and Stop Frequency as desired by using numeric
buttons on the remote control. After this operation,
you can set Search Step as 8000 KHz or 1000 KHz.
If you select 1000 KHz, the Tv will perform search
process in a detailed way. Searching duration will
thus increase accordingly. When nished, press OK
button to start automatic search.
When nished, press OK button to start automatic
search. Automatic searching screen will be displayed
during the process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen: Operation of
analogue channel installation is explained in
“Automatic Channel Scan” section above.
Frequency Search
Enter the desired frequency, Modulation and symbol
rate numbers. Modulation can be set as Auto, 16QAM,
32QAM, 64QAM, 128QAM and 256QAM.
When nished, press OK button, and the TV will start
frequency search.
Network Search
When you select Network Search line and press OK
button, the following menu screen will be displayed
on the screen:
Enter Start and Stop frequency ranges that you
want to search within. After this operation, you
can set Search Step as 8000 KHz or 1000 KHz.
If you select 1000 KHz, the Tv will perform search
process in a detailed way.Searching duration will
thus increase accordingly. When nished press OK
button to continue. The process will then start. During
the Network Search, if channels that have network
search info are found, the TV will automatically show
the frequencies of those channels and network search
process will end by locating those channels.
After search is completed, a message asking whether
to search for analogue channels appears on the
screen: Operation of analogue channel installation
is explained in “Automatic Channel Scan” section
above.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “
” or “ ” button to select Clear Service List and then
press OK. The following OSD will be displayed on
the screen:
Press OK to cancel. Select Yes by pressing “ ” or “ ”
button and press OK to delete all of the channels.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight “First Time
Installation” menu item and press OK button, then
you will be asked whether or not to delete the settings.
Selecting “Yes” by pressing OK button will delete the
existing channel table.
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaub Lorenz 32LT655C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz 32LT655C in the language / languages: English, German as an attachment in your email.

The manual is 14,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info