690865
63
Zoom out
Zoom in
Previous page
1/75
Next page
BASCAP_BF_EN
V03 | 07.2018
63
www.schaerer.comProgramming
Milk settings
Beverage-specific settings for milk volume and milk temperature are available in the "Individ-
ual beverage configuration".
Select the "Configuration" main menu and the "Beverage configuration" menu.
Select the beverage field that is to be adjusted.
The selection window for beverage adjustment opens.
Select the "Modify beverage settings" sub-menu in the selection window.
"General settings" open in the "Single beverage configuration".
Using the control dial, set the milk volume in the "Adjust milk volume" parameter to the re-
quired value between -50% and 100%.
If a setting of e.g -10% is made, the output volume of e.g. 250 ml is reduced to 225 ml.
Set the milk temperature to the required value from -20% to 20% in the "Adjust milk tem-
perature" parameter using the control dial.
If a setting value of -5% is set, for example, the milk temperature dispensed is reduced
from 65°C, for example, to approx. 62°C.
Water volume 1-600 ml
Standard values are:
25 ml (Ristretto)
35 ml (Espresso)
110 ml (Coffee)
35 ml (Cappuccino)
35 ml (Milk coffee)
35 ml (L.Macchiato)
35 ml (Chociatto)
35 ml (White Americano)
35 ml (Americano)
Defines the water quantity for the selected beverage.
Bypass water "With coffee"
"After/before coffee":
0-30 sec
Setting "With coffee", "Before coffee" or "After coffee".
The setting for the bypass water is always made in sec.
Note the instructions in the "Bypass brewing accelerator/
Additional water" parameter.
The "Bypass water present" system parameter is active and
a bypass function is selected in the "Bypass brewing acce-
lerator/Additional water" parameter.
2 x grind quantity 0-9.9 sec
See "Grind quantity" parameter.
"Double beverage" is selected in the "Dispensing mode"
parameter in the "Common settings".
To adjust the volume or temperature of the milk and milk foam, the "Adjust milk volume" and
"Adjust milk temperature" parameters must be changed.
See also "General settings".
Parameters: Coffee settings
Display text Setting range Description
If adjustments need to be made to the milk steps, the air pump must under no circumstances
be adjusted manually during the last milk step to achieve the desired result. To do this, the "Air
pump offset" parameter must be adjusted.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaerer Coffee Art Plus Best Foam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaerer Coffee Art Plus Best Foam in the language / languages: English as an attachment in your email.

The manual is 10,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Schaerer Coffee Art Plus Best Foam

Schaerer Coffee Art Plus Best Foam User Manual - Dutch - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info