745567

Scan 66 series Manual

30
Zoom out
Zoom in
Previous page
1/36
Next page
1.
2.
3.
4.
5.
30
Continuous firing
It is important to reach as high a temperature as possible in the
combustion chamber. This makes the most efficient use of the wood
stove and fuel, and ensures a clean burning process. At the same
time, this avoids soot build-up on the combustion chamber walls and
glass. While the stove is lit, you should not see any smoke, but just air
movement that indicates the burning process.
After completing the lighting phase, you should have a good layer of
embers in the wood stove; you can then start stoking up the stove.
Lay 1-3 pieces of wood, of about max 1,7 kg weight with max 10 cm
diameter and a length of about 25 cm onto the fire.
Note! The wood must catch fire quickly; this is why we recommend
setting the primary airflow to full power. Running the stove at too
low a temperature and with too little primary air can lead to defla-
gration of the gases, and thus cause damage to the stove.
When stoking up with wood, always open the glass door carefully to
avoid smoke escaping. Never stoke up with wood while the fire is still
burning nicely.
Environmentally-Friendly Heating
Avoid restricting your wood-burning stove to an extent where no
flames are visible during the degasifying period, as this leads to
particularly inefficient heating. The gases released by the wood
do not burn due to the low temperature in the combustion cham-
ber. Part of the gas condenses in the wood-burning stove and flue
system as soot, and this could lead to your chimney catching fire.
The smoke that exits the chimney is bad for the environment and
has an unpleasant smell.
Lighting
We recommend the use of fire starters, or similar products, which are
available from your Scan dealer. Using fire starters helps to light the
wood quicker, and keeps the burning process clean.
Never use liquid lighting fuels!
"Top down" lighting
Important! Always use a top-down lighting. The stove is constructed
for this in order to give the best exploitation."Top down" lighting is
a more environmentally friendly way of lighting the fire and helps to
keep the glass area as clean as possible.
2 pieces of wood approx. 20-25 cm long with a weight of approx.
0.5–0.6 kg per piece (image 1)
The wood must not cover the bottom entirely and must never be
placed higher than the Clean-Burn rail at the rear of the stove.
1 pieces of wood approx. 0.3–0.4 kg (image 2) 8-12 thin sticks of about
20 cm with a total weight of approx. 0,5 kg (image 3-5).3 fire starters.
Place logs, sticks and fire starters in the combustion chamber as
shown on images 1-5.
Set the primary and secondary air controls to maximum in the
lighting phase. If the fire is too strong, you may throttle down the
primary air damper (at the left).
INSTRUCTIONS FOR HEATING
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scan 66 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scan 66 series in the language / languages: English as an attachment in your email.

The manual is 7,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scan 66 series

Scan 66 series User Manual - German - 36 pages

Scan 66 series User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info