745567
35
Zoom out
Zoom in
Previous page
1/36
Next page
35
Smoke escaping
Damp wood
Chimney not drawing properly
Chimney is not properly dimensioned for the stove
Check if the smoke gas pipe/chimney are blocked
Is the chimney the right height for its surroundings?
At rear outlet, check that the flue pipe does not obstruct the
chimney draught
Vacuum in room
The door is opened before the embers have burned down
sufficiently
Wood burning too quickly
The air valves are set incorrectly
The baffle plates is incorrectly mounted or missing
Inferior firewood (waste wood, pallets etc.)
Chimney too large
Soot build-up on glass
Incorrect secondary airflow setting
Excessive primary air
Damp wood
Wood pieces too large on lighting
Inferior firewood (waste wood, pallets etc.)
Chimney not drawing sufficiently
Vacuum in room
Excessive soot build-up in chimney
Poor burning (more air required)
Damp wood
The surface of the stove is turning grey
Overheating (see instructions for heating)
Poor heating performance of stove
Damp wood
Not enough wood
Inferior wood quality with low fuel value
Baffle plates are not fitted correctly
Odour coming from stove
The lacquer on the stove hardens when you use the stove for the
first time; this can cause an odour. Open a window or a door for
ventilation, and make sure the stove is heated up sufficiently to
avoid odours later.
When heating up and cooling down, the stove may make some
clicking noises. These are due to the huge temperature differen-
ces to which the material is exposed and do not indicate any
product defects.
Warranty
All wood-fired Scan products are made of high-quality materials and
subject to strict quality controls before leaving the factory. We give a
warranty of 5 years on manufacturing errors or defects.
You must quote your stove‘s product registration number when you
contact us or your authorised Scan dealer with a warranty claim.
The warranty covers all parts which in the opinion of Scan A/S require
repair or replacement due to manufacturing or construction error
The warranty applies to the original purchaser of the product only,
and is not transferable (except on prior sale).
The warranty covers only damage caused by manufacturing or con-
struction errors.
The following parts are not covered by
the warranty
Wear and tear parts, such as the combustion chamber liners,
baffle plates, riddling grate, glass, tiles, and seals (except for
defects which were present on delivery).
Defects caused by external chemical and physical influences
during transportation, storage and assembly, or at a later time.
Soot build-up caused by poor chimney draught, damp wood, or
improper use.
Costs of additional heating in connection with a repair.
Transport costs.
Costs for setting up, removing the wood stove.
This warranty is void
In case of incorrect installation (the installer is responsible for
observing and complying with legal requirements and local
bylaws, along with this Assembly- and Instructionsmanual for
the wood-burning stove and accessories).
In case of improper use, and/or use of prohibited fuels, non-
original spares (see this Assembly- and instructions manual).
If the product registration number of the stove has been remo-
ved or damaged.
In case of repairs that do not comply with our instructions or
instructions by an authorised Scan dealer.
In case of any manipulation of the original state of this Scan
product or its accessories.
This warranty is only valid in the country to which this Scan
product was originally supplied.
Always use original replacement parts, or parts recommended by the
manufacturer.
TROUBLESHOOTING
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scan 66 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scan 66 series in the language / languages: English as an attachment in your email.

The manual is 7,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scan 66 series

Scan 66 series User Manual - German - 36 pages

Scan 66 series User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info