563702
10
Zoom out
Zoom in
Previous page
1/15
Next page
10
FLUE INSTALLATION
The boiler is only suitable for top outlet flue con-
nection.
A - Flue to rear of boiler
Mark correct position of hole from template.
B - Flue to side of boiler
Mark the horizontal centre line for the hole on
the rear wall. Extend the horizontal centre line to
the side wall and mark the vertical centre line of
flue hole as shown in diagram 9.
Under normal circumstances, it will be possible to
gain access to the outside of the building to fit the
flue terminal assembly. Where outside access is not
possible e.g. high rise buildings, the flue terminal
can be fitted from inside the building only if re-
quired.
Important: When cutting the flue hole and when
extending the flue centre line to a side wall, remem-
ber that the flue system must have a fall of about
35 mm per metre of flue DOWNWARD AWAY FROM
the boiler. There must NEVER be a downward in-
cline towards the boiler.
Cutting the flue hole
Making allowance for the slope of the flue, cut
hole in external wall, preferably using a core drill.
For installations with internal and external access -
Use a 105 mm diameter core drill.
For installations with internal access only - Use a
125 mm diameter core drill.
Important: Before cutting the hole for flues to the
rear of boiler, always cover fixing jig to make sure it
is not damaged.
Calculation of flue cutting lengths
Measure wall thickness e (mm), see diagram 9.
For side flues, measure distance from inside face
of side wall to centre line of flue and subtract 260
mm for right and left hand flue to get dimension a
(mm).
Refer to table 1 for cutting lengths of both inner
and outer flue pipes for each of the various flue
options available.
Important: All flue cutting lengths must be meas-
ured from the terminal end of the flue pipes, see
diagram 10.
When the dimension X measured on site is greater
than that given in table 1, a flue extension kit will
be required, refer to table 2 for details.
Diagram 9
Flue option Dimension "X" N° of
extension kits
Side flue 522 to 1478 mm 1
left or right 1479 to 2479 mm 2
Table 2
ee
a
a
X
X
L1
L2
L1
L2
Flue option Cutting length (mm) Comments
outer pipe inner pipe
Rear flue e + 145 e + 228 maximum wall
thickness "e" without
extension 522 mm
Side flue left e + a + 188 e + a + 271 maximum
distance "X" without
extension 739 mm
Side flue right e + a + 188 e + a + 271 maximum
distance "X" without
extension 739 mm
Table 1
Diagram 10
Cutting length
Outer pipe
Inner pipe
Cutting length
Terminal end
Ven 089
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saunier Duval Thelia 30 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saunier Duval Thelia 30 e in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info