734407

Saunier Duval OPALIA X13 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
7
COMMISSIONING AND LIGHTING
1-ON / OFF button
2-hot water temp adjustment
3-reset button
4-safety indicator
12
3
4
Hab 220
Start-up
● Turn the ON / OFF button to ON
● Open a draw OFF tap
● Turn the temperature adjustment to obtain the
desired temperature
Stopping the water-heater
● Turn the ON / OFF button to OFF
In this position the least hottest
water temperature is obtained
(~ 40 °C)
Hab 236
Hab 237
Hot water temperature adjustment
In this position the hottest water
temperature is obtained (up to
60 °C for a minimal flow rate)
Operating principles
The OPALIA X13 water-heater operates with no per-
manent pilot :
- when a hot water tap is opened, the gas entering
the burner is ignited by a spark train emitted by the
ignition electrode. A second electrode checks for
the presence of a flame at the burner, the appliance
is shut down by disconnection;
- when the hot water tap is closed, the gas input is
cut off by the valve and the appliance is shut down.
IMPORTANT : before operating the boiler, remove
the two fan transit packing pieces
Safety shutdown
A malfunction or an abnormality gives rise to the
disconnection of the appliance, and the safety
indicator (4) lights ...............................................
To restart the water-heater,
press the RESET button (3) ..................................
SAFETY DEVICES
Air flow safety device (air pressure switch )
In the event of even
partial blockage of the
flue, for whatever reason
resulting in a reduced air
flow, the water-heater’s
built-in safety device
comes into operation :
the burner is shut down
whilst the fan continues to operate. The water-
heater is ready to operate as soon as the fault has
been rectified.
In the event of loss of gas supply
The safety device automatically disconnects the
water-heater. When the gas supply is restored, press
the "RESET" button .
In the event of a power cut
The water-heater will cease to operate. When the
electricity supply is restored, the heater will auto-
matically restart.
Overheat cutout device
If anything occurs
which results in the
overheat cutout
device shutting down
the water-heater,
please call your nearest
approved after-sales
organisation.
IMPORTANT : It is
forbidden to bypass or tamper with any of the safety
devices. If, after attempting to use the heater, a
safety shut-down condition occurs, this must be
rectified immediately by a qualified, competent
person.
Sec 045
Sec 044
Downloaded from www.Manualslib.com manuals search engine
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saunier Duval OPALIA X13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saunier Duval OPALIA X13 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info