782989

Sauber PAC-125773 Manual

30
Zoom out
Zoom in
Previous page
1/77
Next page
- 29 -
Continuous Drainage
Under normal use, the unit can evaporate the condensate water automatically by the splash motor. If the
water splash motor is damaged, continuous drainage (drain the water from the bottom outlet) can be used
manually. Under this condition, the water full indicator will light up. Please remove the rubber boot and then
the rubber stopper from the drainage outlet and connect a drain hose to the outlet, then all the water in the
water tank will be drained out. The unit can also work well. But in order not to decrease the efficiency of the
performance, please contact authorized service technician to repair the splash motor as soon as possible.
When you plan to leave this unit unused for a long time, please also remove the rubber stopper from the
drainage outlet at the bottom of unit, and drain out all the water.
CLEANING AND MAINTENANCE
Before cleaning, be sure to disconnect the appliance from any electric supply outlet.
Do not use gasoline or other chemicals to clean the appliance.
Do not wash the appliance directly.
If the appliance is damaged, please contact the dealer or repair shop.
Air Filter
If the air filter becomes clogged with dust/dirt, the air filter should be cleaned once every two weeks.
- Pull out the air filter from the air inlet grille by the pull tab.
- Clean the air filter with neutral detergent in lukewarm water (40℃) and dry it up in the shade.
- Insert the air filter back into the air inlet grille; replace the components as they were.
Clean the Surface
First clean the surface with a neutral detergent and wet cloth, and then wipe it with a dry cloth.
TROUBLESHOOTING
Troubles
Possible Causes
Solutions
Appliance does
not start when
pressing the
power button
Water full indicator light blinks, and water
tank is full.
Remove the rubber stopper to dump
the water out from the drainage outlet.
Room temperature is lower than the
setting temperature.
Reset the temperature.
Not cool enough
The doors or windows are not closed.
Make sure all the windows and doors
are closed.
There are heat sources inside the room.
Remove the heat sources if possible.
The hot air exhaust hose is not connected
or blocked.
Connect or clean the hot air exhaust
hose.
Temperature setting is too high.
Reset the temperature.
Air inlet is blocked.
Clean the air inlet.
Noisy
The ground is not level or not flat enough.
Place the appliance on a flat, level
surface if possible.
The sound comes from the flowing of the
refrigerant inside the appliance.
It is normal.
E0 Code
Room temperature sensor failed.
Replace the room temperature sensor.
Contact authorized service technician
for repair.
E1 Code
Condenser temperature sensor failed.
Replace condenser temperature sensor.
Contact authorized service technician
for repair.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sauber PAC-125773 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sauber PAC-125773 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info