441342
6
Zoom out
Zoom in
Previous page
1/12
Next page
Manual SA 235
pag. 5
Two weight margins can be entered: the down limit and the up limit.
If the weight value is: - higher as the up limit, Led "HI" lights up
- in between the up and down limit, Led "OK" lights up
- lower as the down limit, Led "LO" lights up
This weight control works for a gross, as well as for a tared (net) weight reading.
In the user mode a "beep" sound may be connected to the weight margins.
The accuracy of the margins is based upon the High Resolution weight reading, even if this is not the
actual selected weight reading.
Note:
The check-weighing function cannot be active in the piece counting mode. Both function cannot be active at
the same time.
First switch off the selected mode (key > 2 sec.) and switch off the scale. Switch the scale on again and
select the required mode.
Before entering the weight margins, the weigh platform has to be empty
and the reading at gross zero: the Led should light up and the Led
above should be off.
1. Press key continuously and then press key > 2 seconds,
until the display shows: rANG . Now release both the keys.
2. Press again key in order to enter the "Low" weightvalue margin,
the Led next to "LO" lights up.
2. The flashing figure may be increased with cursor key .
With cursor key the next to the right figure can be selected.
3. Confirm the entered weightvalue with enter key . The display
now switches to input of the "High" weightvalue margin,
the Led next to "HI" lights up.
4. Enter the "High" weightvalue margin in the same way.
5. Confirm the entered weightvalue with enter key . The display
switches off and the checkweigh mode is started.
6. With key the checkweigh mode can be switched off temporarily
and back on again.
If temporarily switched off, all 3 the Leds light up, indicating that the
checkweigh mode is still active.
7. By pressing key for longer than 2 seconds, the weight margins
are deleted and the function is switched off.
WEEGTECHNIEK HOLLAND B.V. Website www.satex.nl Tel +31 36 522 20 30
Patroonsweg 23 Email info@satex.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
Check weighing ( check weighing with 2 settable weight margins)
lb
kg
g
lb
kg
g
W HI
W OK
W LO
W HI
W OK
W LO
lb
kg
g
W HI
W OK
W LO
lb
kg
g
lb
kg
g
W HI
W OK
W LO
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satex SA 235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satex SA 235 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satex SA 235

Satex SA 235 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info