699462
8
Zoom out
Zoom in
Previous page
1/12
Next page
6 VERSA-LCDM-WRL SATEL
Wake-up - maximum length of time for which the active mode can be started automatically. If you
enter a value different from 0:
the active mode will be started automatically when an alarm occurs or an entry delay or an exit
delay begins,
the CHIME from zones will also be signaled in the inactive mode.
If you enter 0, the active mode will not be started automatically.
If a value different from 0 is preset for the
W
AKE
-
UP
parameter, the keypad will be
awaiting for transmissions with information on events. As a result, the energy
consumption will be growing and the battery life will be considerably reduced.
Card reader – if this option is enabled, the card reader is supported.
4.2 Settings stored in the control panel
These settings are configured in exactly the same way, as for the wired keypad:
DLOADX program: “VERSA – Structure” window “Hardware” tab “Expansion modules”
branch [keypad name] (see: Fig. 4),
LCD
keypad:
S
ERVICE MODE
2. H
ARDWARE
1. K
PDS
.
&
EXPS
.
2. S
ETTINGS
[keypad
name].
4.2.1 Parameters and options
Given in the square brackets are the names of parameters and options presented on the keypad
display.
Name – individual name of the keypad (up to 16 characters).
Tamper signaled in part. [Tamper in p.] – partition in which tamper alarm will be triggered if the
keypad tamper switch is opened or the keypad is not present.
CHIME signal of zones [Zone chime] – the keypad can audibly signal violation of selected zones. If
the zone is armed, violation will not trigger the CHIME signal.
The wireless keypad signals the CHIME from zones not more frequently than once every 30
seconds. In the inactive mode, the CHIME from zones is only signaled if a value different from
0 is preset for the
W
AKE
-
UP
parameter.
Sign. entry delay [Entry time sign.] – if this option is enabled, the keypad will audibly signal the entry
delay countdown. In the inactive mode, the entry delay is not signaled.
Sign. exit delay [Exit time sign.] – if this option is enabled, the keypad will audibly signal the exit
delay countdown. In the inactive mode, the exit delay is not signaled.
Sign. alarms [Alarm signalling] – if this option is enabled, the keypad will signal the alarms audibly.
The alarm is signaled during the
K
EYPAD
S ALARM TIME
(refer to the control panel programming
manual). In the inactive mode, the alarms are not signaled. The alarms are not signaled, if the
G
RADE
2
option is enabled in the control panel.
Quick arming – Partition 1 [Part.1 QuickArm] – if this option is enabled, quick arming (without user
authorization) of the partition 1 is possible. The quick arming is not possible, if the
G
RADE
2
option
is enabled in the control panel.
Quick arming – Partition 2 Part.2 QuickArm] – if this option is enabled, quick arming (without user
authorization) of the partition 2 is possible. The quick arming is not possible, if the
G
RADE
2
option
is enabled in the control panel.
Keys sound – with this option enabled, pressing the keypad keys is confirmed by beeps.
Sign. trbl in part. arm [Trbl.in part.arm] – if this option is enabled, the
LED goes off after both
partitions are fully armed (if the option is disabled, the LED goes off after just one of the partitions
is armed in any mode).
Show code entering [Code entry ind.] – if this option is enabled, entering the code is presented on
the keypad display by asterisks.
Chime on/off – if this option is enabled, the chime signal can be enabled/disabled by means of the
key (the key is to be pressed for about 3 seconds).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA-LCDM-WRL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA-LCDM-WRL in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA-LCDM-WRL

Satel VERSA-LCDM-WRL User Manual - German - 12 pages

Satel VERSA-LCDM-WRL User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info