629722
34
Zoom out
Zoom in
Previous page
1/43
Next page
32 VERSA IP SATEL
When testing the zones, the keypad does not present the current zone state, but only
indicates whether or not the zone was violated during the test.
1. Enter the user menu and press in turn .
2. Enter two digits to define the test duration (e.g. if the time is to be 5 minutes, press in turn
and – the test may last from 1 to 15 minutes), and then press . The
keypad will indicate the zones which can be tested, using the symbol (the numbers
around the display enable identification of the zones).
3. Violate the selected zones (e.g. walking through the area supervised by the motion
detector or opening the window supervised by the magnetic contact). The keypad should
inform you that the zone has been violated (the zone symbol changes to ). Information
on the violation will be presented until the zone test is terminated.
4. The test will be terminated automatically after the defined time has elapsed. You can
terminate it earlier by pressing .
6.21.2 Output test
The function makes it possible to check proper functioning of the system outputs as well as
devices connected to them.
You can always test 12 outputs.
1. Enter the user menu and press in turn
. The keypad will present the
state of outputs in the upper line of the display (
– output inactive; – output active).
The name of output over which the cursor is currently situated is displayed in the lower
line. The and keys allow moving the cursor.
2. Press to activate the output, or to deactivate the output.
3. Press to quit the function.
6.21.3 Checking the level / quality of radio signal
The function allows you to check:
the quality of radio signal received by the controller from 433 MHz wireless detectors (if the
VERSA-MCU controller is connected to the control panel),
the level of radio signal received by the controller from ABAX wireless devices (if the
ABAX system controller is connected to the control panel).
Enter the user menu and press in turn
. In the lower line of the display, the
information on signal level / quality will be shown. The upper line displays the name of zone
to which the wireless device is assigned.
Use the arrow keys to scroll through the list.
6.21.4 Starting the manual test transmission
Enter the user menu and press in turn . A “Manual reporting test” event will
be saved to the control panel memory. The event code will be sent to the monitoring station.
6.21.5 Telephone reporting test
Enter the user menu and press in turn (test of telephone reporting to
Station 1) or (test of telephone reporting to Station 2). Messages with
information on the currently realized operations will appear on the display. This allows
problems, if any, to be diagnosed.
6.21.6 Checking the firmware version of control panel
Enter the user menu and press in turn . Information on the control panel
firmware version and build date will be displayed.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa IP in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa IP

Satel Versa IP Quick start guide - English - 11 pages

Satel Versa IP User Manual - English - 32 pages

Satel Versa IP Installation Guide - English - 36 pages

Satel Versa IP Additional guide - English - 93 pages

Satel Versa IP Quick start guide - German - 11 pages

Satel Versa IP Additional guide - German - 97 pages

Satel Versa IP User Manual - German - 45 pages

Satel Versa IP Installation Guide - German - 38 pages

Satel Versa IP Quick start guide - Dutch - 2 pages

Satel Versa IP User Manual - Dutch - 45 pages

Satel Versa IP Quick start guide - Dutch - 12 pages

Satel Versa IP Additional guide - Dutch - 93 pages

Satel Versa IP User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info