629722
79
Zoom out
Zoom in
Previous page
1/93
Next page
SATEL VERSA IP 77
12.1.4 SMS/Pager messages
You can program up to 64 text messages that will be used for notification. You can assign a
voice message to each text message. The built-in voice module can play back up to 16 voice
messages. You can synthesize the voice messages using the VG-SOFT program (see: “VG-
Soft program and voice module configuring” p. 84). The text messages are numbered from 1
to 64. The voice messages are numbered from 0 to 15. The same voice message can be
assigned to several text messages.
For PAGER messaging, define the pager identification parameters.
12.1.5 Starting the telephone messaging
1. Enable the TELEPHONE MESSAGING option (see: “Global options” p. 27).
2. Define the number of attempts made by the control panel to notify about the event
(parameters R
OUND COUNT and RETRIES NO. FOR ONE ROUND).
3. Enter the phone numbers that are to be notified, and description of those phone numbers.
4. Specify, of which events, which phone numbers and by means of which messages the
control panel is to notify (remember that a text message number is assigned to each
event, and the voice message assigned to that text message will be used for voice
notification).
5. Determine whether alarm clearing should cancel the messaging (global option C
LEAR
MESSAGING ON ALARM CLEARING
).
6. Configure the global options related to telephone communicator:
determine how the telephone numbers should be dialed (TONE DIALING; in case of the
pulse dialing option – PULSE 1/1,5 (OFF 1/2)),
determine whether the control panel, prior to dialing the number, should check the
telephone line for dialing signal (NO DIAL TONE TEST),
PAGER / SMS messaging
1. Select PAGER1 or PAGER2 as the messaging type for the phone number to be notified.
2. Enter the content of messages that are to be used for notification.
3. Define the pager identification parameters (PAGER1 factory settings are configured for
sending the message as SMS message via the SATEL GSM module).
Voice messaging
1. For the telephone number to be notified:
select voice messaging as the type of notification,
enter the code, if the telephone user can confirm having listened to the voice message
and clear the messaging,
indicate the alarm system user, if the telephone user is to automatically get access to
the voice menu after entering the code (the user must have the INT-VG ACCESS right).
2. Assign voice messages to text messages.
3. Synthesize the voice messages that are to be used for notification (see: “VG-Soft program
and voice module configuring” p. 84).
4.
Determine whether the control panel is to play back the voice message after going off-
hook, or 8/16 seconds after the dialing is completed (N
O ANSWER TONE TEST).
12.2 E-mail messaging
E-mail messages are sent by means of the Ethernet communication module. The content of
e-mail messages is automatically generated by the control panel.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa IP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa IP

Satel Versa IP Quick start guide - English - 11 pages

Satel Versa IP User Manual - English - 32 pages

Satel Versa IP Installation Guide - English - 36 pages

Satel Versa IP User Manual - English - 43 pages

Satel Versa IP Quick start guide - German - 11 pages

Satel Versa IP Additional guide - German - 97 pages

Satel Versa IP User Manual - German - 45 pages

Satel Versa IP Installation Guide - German - 38 pages

Satel Versa IP Quick start guide - Dutch - 2 pages

Satel Versa IP User Manual - Dutch - 45 pages

Satel Versa IP Quick start guide - Dutch - 12 pages

Satel Versa IP Additional guide - Dutch - 93 pages

Satel Versa IP User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info