629722
59
Zoom out
Zoom in
Previous page
1/93
Next page
SATEL VERSA IP 57
ARD-100 – wireless reorientation detector. Sensitivity is to be programmed.
ASD-150 – wireless smoke detector. The following is to be programmed:
option to signal alarm from other ASD-150 detectors;
option to send out alarm to other ASD-150 detectors.
AVD-100 – wireless vibration detector and magnetic contact. The following is to be
programmed:
active reed switch [first zone],
sensitivity of vibration detector (registering a single vibration meeting the sensitivity
criterion will cause alarm) [second zone],
the number of pulses which, if registered by vibration detector will cause alarm (the
pulses need not meet the sensitivity criterion) [second zone].
Working parameters of the vibration detector are independently analyzed. The
detector can trigger alarm after registering a single, strong vibration caused by
a powerful impact, and also on registering several slight vibrations caused by a series
of weak strikes.
ASP-100 – wireless outdoor siren. The following is to be programmed:
type of acoustic signaling;
maximum duration of signaling.
ASP-105 – wirelessly triggered outdoor siren. The following is to be programmed:
type of acoustic signaling,
maximum duration of acoustic signaling.
ASP-205 – wireless indoor siren. Signaling parameters can be programmed for both
positions occupied by the siren (thus allows to program two different signaling types):
maximum duration of signaling (optical and acoustic),
type of acoustic signaling,
optical signaling option.
ASW-100 E / ASW-100 F – 230 V AC wireless controller. Operating mode can be
programmed.
9.4.3 Configuring the ABAX wireless devices
DLOADX program
You can configure the wireless devices as follows: “VERSA – Structure” window
“Hardware” tab “Expansion modules” branch [ABAX system controller name]
“Zones/Outputs” tab. Before making any changes, click on the “Read” button, and after
making the changes – on the “Write” button (the data relating to the wireless devices are not
read after clicking on the
button or saved after clicking on the button in the
DLOADX program main menu). Described below is how the additional parameters and
options should be programmed in the “Configuration” column.
AGD-100 – enter a digit from the 1 to 3 range to set the sensitivity (1 – low, 2 – medium,
3 - high).
AMD-100 / AMD-101 – enter the digit 0 (bottom reed switch) or 1 (side reed switch) to
determine which of the two reed switches is to be active.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa IP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa IP

Satel Versa IP Quick start guide - English - 11 pages

Satel Versa IP User Manual - English - 32 pages

Satel Versa IP Installation Guide - English - 36 pages

Satel Versa IP User Manual - English - 43 pages

Satel Versa IP Quick start guide - German - 11 pages

Satel Versa IP Additional guide - German - 97 pages

Satel Versa IP User Manual - German - 45 pages

Satel Versa IP Installation Guide - German - 38 pages

Satel Versa IP Quick start guide - Dutch - 2 pages

Satel Versa IP User Manual - Dutch - 45 pages

Satel Versa IP Quick start guide - Dutch - 12 pages

Satel Versa IP Additional guide - Dutch - 93 pages

Satel Versa IP User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info