629722
43
Zoom out
Zoom in
Previous page
1/93
Next page
SATEL VERSA IP 41
7. Outputs
The system supports the following outputs:
hardwired – on the control panel PCB and in the expander.
wireless – after connection of the ABAX wireless system controller (ACU-120, ACU-270,
ACU-100 or ACU-250). The number of available wireless outputs depends on the number
of wireless devices registered in the system and is determined during the procedure of
adding them.
7.1 Configuring the outputs
You can configure the outputs as follows:
DLOADX program: “VERSA – Outputs” window (Fig. 10).
keypad: OUTPUTS function SERVICE MODE 2. HARDWARE 3. OUTPUTS). Programming is
performed by means of the “step by step” method (see: p. 6):
1. Select output.
2. Output function.
3. Cut-off time.
4. Triggering zones [the partition armed mode is selected for the outputs with functions
18. ARMED STATUS and 20. ALARM/ARM STATUS, and the troubles for the output with
function 19. TROUBLE STATUS (see: Section OUTPUT PARAMETERS)].
5. Output options.
6. Output name [only in LCD keypad].
7.2 Output functions
0. NOT USED
1. EXTERNAL SIREN – signals the burglary, panic and tamper alarms.
2. INTERNAL SIREN – signals the burglary, panic and tamper alarms, as well as the warning
alarms.
The way of signaling the tamper alarms by the outputs with functions 1. EXTERNAL
SIREN and 2. INTERNAL SIREN depends on the global options TAMPER ALARM ALWAYS
AUDIBLE and TAMPER ALARM ON INTERNAL SIRENS.
3. BURGLARY – signals the alarms from 0 to 5 type zones.
4. FIRE ALARM – signals the fire alarms from keypad and from 10. 24H FIRE type zones.
5. “DURESS” ALARM – signals that code with DURESS right was used for arming/disarming or
alarm clearing.
6. PANIC ALARM – signals the panic alarms from keypad and from 7. 24H PANIC type zones.
7. AUX. ALARM – signals the medical assistance call alarms triggered from keypad and from
9. 24H MEDICAL type zones.
8. ALARM NOT VERIFIED – signals the unverified alarms.
9. ALARM - VERIFIED – signals the verified alarms.
10. TAMPER ALARM – signals the tamper alarms.
11. FIRE DETECTORS POWER SUPPLY – the dedicated output for power supply of the fire
detectors with automatic verification alarm. After violation of the fire zone the output will be
disabled for 16 seconds. If, after the power is turned on again, another violation from the
fire zone occurs, the fire alarm will be triggered.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa IP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa IP

Satel Versa IP Quick start guide - English - 11 pages

Satel Versa IP User Manual - English - 32 pages

Satel Versa IP Installation Guide - English - 36 pages

Satel Versa IP User Manual - English - 43 pages

Satel Versa IP Quick start guide - German - 11 pages

Satel Versa IP Additional guide - German - 97 pages

Satel Versa IP User Manual - German - 45 pages

Satel Versa IP Installation Guide - German - 38 pages

Satel Versa IP Quick start guide - Dutch - 2 pages

Satel Versa IP User Manual - Dutch - 45 pages

Satel Versa IP Quick start guide - Dutch - 12 pages

Satel Versa IP Additional guide - Dutch - 93 pages

Satel Versa IP User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info