699458
53
Zoom out
Zoom in
Previous page
1/87
Next page
SATEL VERSA 51
Arming
Card hold-down – if you select this option, the user will have to bring the card close to the
keys and hold it still for about 3 seconds to arm the system.
Card read – if you select this option, the user will only have to bring the card close to the
keys to arm the system.
When configuring the keypad by using functions available in the service mode, use the
PROX.CARD - ARMS option to define how to arm the system using the proximity card
(option enabled = CARD READ; option disabled = CARD HOLD-DOWN).
Card hold-down control outputs
If you have selected the CARD READ option, you can permit the users to toggle the
15. CONTROLLED type outputs (the output status will change after the card is brought close to
the keys and held still for about 3 seconds). Select the outputs the users will be allowed to
control.
8.3 Ethernet module
The parameters and options, as described below, apply to the ETHM-1 Plus module
with firmware version 2.04.
DLOADX
DLOADX->ETHM-1 connection [DLOADXETHM-1] – if this option is enabled, it is
possible to initiate connection with the control panel via Ethernet from the DLOADX
program.
DLOADX server – address of the computer with DLOADX program. If the computer is not in
the same local network as the control panel, it must be a public address. You can enter
either the IP address or the domain name.
Port – number of the TCP port used for communication between control panel and
a computer with DLOADX program via Ethernet. You can enter values from 1 to 65535.
Default value: 7090.
DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special
characters) which is used for data encryption during communication between control panel
and computer with DLOADX program via Ethernet.
SATEL service
LAN [SATEL server LAN] – if this option is enabled, the control panel connects to the SATEL
server via the Ethernet module, while the SATEL server makes it possible to establish
communication with the control panel. For communication vie the SATEL server, you do
not need to additionally configure the network device through which the module connects
to the public network.
For establishing communication with the SATEL server, the DNS server must be used.
For communication via the SATEL server, the ports of 1024-65535 range are used as
outgoing ports. These ports must not be blocked.
Do not report SATEL server connection trouble [No SATEL trbl.] – if this option is
enabled, loss of communication with the SATEL server will not be reported.
Communication with mobile application [Mobile app.] – if this option is enabled,
communication with the control panel can be established from the mobile application. The
option is available if the LAN option is enabled.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 15 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 15

Satel VERSA 15 Quick start guide - English - 11 pages

Satel VERSA 15 Installation Guide - English - 36 pages

Satel VERSA 15 User Manual - English - 32 pages

Satel VERSA 15 User Manual - English - 42 pages

Satel VERSA 15 Additional guide - German - 11 pages

Satel VERSA 15 User Manual - German - 44 pages

Satel VERSA 15 Installation Guide - German - 37 pages

Satel VERSA 15 Quick start guide - German - 2 pages

Satel VERSA 15 Quick start guide - Dutch - 11 pages

Satel VERSA 15 User Manual - Dutch - 44 pages

Satel VERSA 15 Quick start guide - Dutch - 2 pages

Satel VERSA 15 Additional guide - Dutch - 86 pages

Satel VERSA 15 Installation Guide - Dutch - 35 pages

Satel VERSA 15 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info