699458
51
Zoom out
Zoom in
Previous page
1/87
Next page
SATEL VERSA 49
LED keypad – by means of LEDs in the lower line of LEDs.
Chime on/off – if this option is enabled, the chime signal can be turned on/off by means of
the key (the key is to be pressed for about 3 seconds).
Quick control – if this option is enabled, the users can control the outputs by using the
number keys. The 15. CONTROLLED outputs must be assigned to the keys (see: “Quick
control of outputs” p. 46).
Sign. new trouble [New trbl.signal.] – if this option is enabled, the keypad will audibly signal
occurrence of any new trouble (additionally, the TROUBLE MEMORY UNTIL REVIEW option
must be enabled in the control panel – see: “Global options” p. 27). The signaling will be
turned off after reviewing the trouble with the SYSTEM STATE user function. The new
troubles will not be signaled, if the GRADE 2 option is enabled in the control panel.
Auto-Arm delay countdown [Autoarm signal.] – if this option is enabled, the auto-arm delay
countdown is signaled acoustically (not applicable to the LED keypads).
Arm mode review [Arm mode check.] – if this option is enabled, holding down the key
for about 3 seconds will display information on the partition status. The users cannot check
the partition status using the key, if the GRADE 2 option is enabled.
Alarms
FIRE alarm – if this option is enabled, pressing the key for approx. 3 seconds will
trigger the fire alarm.
AUX. alarm [Medical alarm] – if this option is enabled, pressing the key for approx. 3
seconds will trigger the auxiliary (medical) alarm.
PANIC alarm – if this option is enabled, pressing the key for approx. 3 seconds will
trigger the panic alarm.
silent [Silent panic] – if this option is enabled, the panic alarm triggered from the keypad will
be a silent one (without loud signal). The option is available, if the PANIC ALARM option is
enabled.
Alarm 3 incorrect codes [3 wrong codes] – if this option is enabled, entering incorrect code
three times will trigger the alarm.
Alarm messages
Partitions [Part.alarm msg.] – if this option is enabled, messages on partition alarms will be
displayed (they contain the name of partition).
Zones [Zone alarm msg.] – if this option is enabled, messages on alarms from zones will be
displayed (they contain the name of zone). The zone alarm messages have the priority.
The messages are presented on the display of LCD keypad.
The messages will not be displayed, if the GRADE 2 global option is enabled.
8.2.2 Volume
The volume level for different events is configurable in the case of VERSA-LCDM,
VERSA-LCDR and VERSA-LCDM-WRL keypads.
Volume – volume level of the beeps generated during keypad operation (key pressing,
confirmation of performed operation, etc.).
Chime – volume level of the beeps generated after zone violation (CHIME).
Entry delay – volume level of the entry delay beeps.
Exit delay – volume level of the exit delay beeps.
Fire alarm – volume level of the fire alarm beeps.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 15 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 15

Satel VERSA 15 Quick start guide - English - 11 pages

Satel VERSA 15 Installation Guide - English - 36 pages

Satel VERSA 15 User Manual - English - 32 pages

Satel VERSA 15 User Manual - English - 42 pages

Satel VERSA 15 Additional guide - German - 11 pages

Satel VERSA 15 User Manual - German - 44 pages

Satel VERSA 15 Installation Guide - German - 37 pages

Satel VERSA 15 Quick start guide - German - 2 pages

Satel VERSA 15 Quick start guide - Dutch - 11 pages

Satel VERSA 15 User Manual - Dutch - 44 pages

Satel VERSA 15 Quick start guide - Dutch - 2 pages

Satel VERSA 15 Additional guide - Dutch - 86 pages

Satel VERSA 15 Installation Guide - Dutch - 35 pages

Satel VERSA 15 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info