699459
43
Zoom out
Zoom in
Previous page
1/87
Next page
SATEL VERSA 41
When using the DLOADX program, open the “VERSA – Structure” window, go to the
“System” tab, click on the zone, and then select whether the zone on mainboard, in zone
expander or wireless system controller is to be supervised.
When using the keypad:
you can use the WIRELSS.ZONES function (SERVICE MODE 2. HARDWARE 1. KPDS & EXPS.
3. WIRELESS DEV. 4. WIRELSS.ZONES) to select whether a wireless or wired zone will be
supervised. In the case of LCD keypad, the symbol next to the zone name has the
following meaning:
- wireless zone is supervised
;
- wired zone is supervised. In the
case of LED keypad, the LEDs designated by numbers (LED number corresponds to zone
number) provide the following information: LED ON – a wireless zone is supervised; LED
OFF – a wired zone is supervised.
you can use the VERSA ZONES function (SERVICE MODE 2. HARDWARE 7. VERSA
ZONES
) to select the wired zone to be supervised. In the case of LCD keypad, the symbol
next to the zone name has the following meaning:
- zone on the mainboard is
supervised
;
- zone in the zone expander is supervised. In the case of LED keypad, the
LEDs designated by numbers (LED number corresponds to zone number) provide the
following information: LED ON –
zone on the mainboard is supervised
; LED OFF – zone
in the zone expander is supervised.
7. Outputs
The system supports the following outputs:
hardwired – on the control panel PCB and in the expander.
wireless – after connection of the ABAX wireless system controller (ACU-120, ACU-270,
ACU-100 or ACU-250). The number of available wireless outputs depends on the number
of wireless devices registered in the system and is determined during the procedure of
adding them.
7.1 Configuring the outputs
You can configure the outputs as follows:
DLOADX program: “VERSA – Outputs” window (Fig. 10).
keypad:
OUTPUTS function SERVICE MODE 2. HARDWARE 3. OUTPUTS). Programming is
performed by means of the “step by step” method (see: p. 6):
1. Select
output.
2. Output function.
3. Cut-off time.
4. Triggering zones [the partition armed mode is selected for the outputs with functions
18. ARMED STATUS and 20. ALARM/ARM STATUS, and the troubles for the output with
function 19. TROUBLE STATUS (see: Section OUTPUT PARAMETERS)].
5. Output options.
6. Output name [only in LCD keypad].
7.2 Output functions
0. NOT USED
1. EXTERNAL SIREN – signals the burglary, panic and tamper alarms.
2. INTERNAL SIREN – signals the burglary, panic and tamper alarms, as well as the warning
alarms.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Quick start guide - English - 11 pages

Satel VERSA 10 Installation Guide - English - 36 pages

Satel VERSA 10 User Manual - English - 32 pages

Satel VERSA 10 User Manual - English - 42 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info