699459
85
Zoom out
Zoom in
Previous page
1/87
Next page
SATEL VERSA 83
– EVENTS AMOUNT LIMITING (in the DLOADX program, the option is available in the
reporting options),
– BLOCK AFTER 3 UNKNOWN CODES/CARDS.
disable the global options:
– TAMPER ALARM ALWAYS AUDIBLE,
– ARM EVEN IF NOT READY AFTER EXIT DELAY.
program the AC loss time after which a trouble will be reported to be no longer than 60
minutes (AC LOSS REPORT DELAY global parameter),
in case of arming by means of timers, program the suitable auto-arming delay in partitions
so that the system users can be warned of the automatic arming,
program the entry delay to be no longer than 45 seconds,
enable the AUTO-RESET 3 option for all burglary zones,
disable the A
LARM ON EXIT DELAY END option for alarm zones beyond the exit route,
enable the B
YPASS DISABLED option for tamper, panic and trouble zones,
remember that the operation time of acoustic sirens should be minimum 90 seconds and
maximum 15 minutes (which requires suitable configuration of the cut-off time of alarm
signaling outputs).
14. Control panel firmware update
1. Download the update program for control panel firmware from www.satel.eu.
2. Connect the control panel RS-232 (TTL) port with the computer port (for example, using
the USB-RS converter offered by SATEL).
3. Update the control panel firmware, using one of the methods described below.
When the firmware update is running, the control panel does not execute its normal
functions.
14.1 Standard update procedure
1. Use the keypad to enter the service mode (enter the service code and press , and
then ).
2. Press in turn
. The STARTER function will start. The control panel will
be waiting until communication with the firmware updating program is established (you
can terminate the STARTER function by pressing
).
3. Run the update program for control panel firmware.
4. Click on the button.
5. In the window that will be displayed, indicate the COM port of the computer to which the
control panel is connected and click “OK”. The firmware updating program will establish
communication with the control panel.
6. When a prompt window is displayed asking you whether to continue the firmware update,
click “Yes”. The control panel firmware will be updated.
14.2 Emergency update procedure
If the control panel does not support keypads, does not accept the service code, etc., you
can make use of the following procedure to update the control panel firmware.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Quick start guide - English - 11 pages

Satel VERSA 10 Installation Guide - English - 36 pages

Satel VERSA 10 User Manual - English - 32 pages

Satel VERSA 10 User Manual - English - 42 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info