699459
22
Zoom out
Zoom in
Previous page
1/32
Next page
20 VERSA SATEL
2. Step 1. Selecting user whose data are to be edited. You can make your selection by
using the and keys or by entering the user number (the LED designated by
the number of selected user should start blinking). Having selected the user, press .
You can press to interrupt the procedure of editing a user. Any changes made in
the steps ended by pressing the key will be saved.
3. Step 2. Changing user code. Proceed in the same way as when adding a new user.
4. Step 3. Selecting user schedule. Proceed in the same way as when adding a new user.
5. Step 4. Selecting partitions accessible to the user. Proceed in the same way as when
adding a new user.
6. Step 5. Editing 433 MHz keyfob. Press:
, if you want to move on to the next step,
and in turn, if you want to add a keyfob (the procedure is similar to that for
adding a 433 MHz keyfob to a new user, however, if the user had a keyfob before, the
control panel, during assignment of functions to the buttons, will suggest the same
functions as were assigned to the removed keyfob),
and in turn, if the user has a keyfob and you want to edit functions
assigned to the keyfob buttons (the procedure is similar to that for assigning functions
after a 433 MHz keyfob has been added to a new user),
and in turn, if you want to remove a keyfob.
Removal of the keyfob does not erase its settings (functions assigned to the keyfob).
The installer can remove all the 433 MHz keyfobs and their settings by using the
REM.RX K-FOBS function (SERVICE MODE 2. HARDWARE 1. KPDS. & EXPS.
9. REM.RX K-FOBS).
7. Step 6. Editing APT-100 keyfob. Press:
, if you want to move on to the next step,
and in turn, if you want to add a keyfob (the procedure is similar to that for
adding the APT-100 keyfob to a new user, however, if the user had a keyfob before,
the control panel, when assigning functions to the buttons and defining the rules of
confirmation, will suggest the same settings as for the removed keyfob),
and in turn, if the user has a keyfob and you want to edit functions
assigned to the keyfob buttons (the procedure is similar to that for assigning functions
after an APT-100 keyfob has been added to a new user),
and in turn, if you want to remove a keyfob.
Removal of the keyfob does not erase its settings (functions assigned to the keyfob
and rules of confirmation).
The installer can remove all the APT-100 keyfobs and their settings by using the
REM.ABAX KFBS function (SERVICE MODE 2. HARDWARE 1. KPDS. & EXPS. 8.
REM.ABAX KFBS).
and in turn, if the user has a keyfob and you want to edit the rules of
confirmation (the procedure is similar as for defining the rules of confirmation after an
APT-100 keyfob has been added to a new user).
8. Step 7. Editing proximity card. Press:
, if you want to move on to the next step,
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Quick start guide - English - 11 pages

Satel VERSA 10 Additional guide - English - 87 pages

Satel VERSA 10 Installation Guide - English - 36 pages

Satel VERSA 10 User Manual - English - 42 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info