699459
21
Zoom out
Zoom in
Previous page
1/32
Next page
SATEL VERSA 19
13. Arming: Partition 1 LED is ON when partition 1 is armed
14. Arming: Partition 2 LED is ON when partition 2 is armed
15. Arming: Partition 1 or 2 LED is ON when partition 1 or 2 is armed
16. Arming: Partition 1 and 2 LED is ON when partitions 1 and 2 are armed
17. Partition 1 – Full arm LED is ON when partition 1 is armed in full mode
18. Partition 1 – Night arm LED is ON when partition 1 is armed in night mode
19. Partition 1 – Day arm LED is ON when partition 1 is armed in day mode
20. Partition 2 – Full arm LED is ON when partition 2 is armed in full mode
21. Partition 2 – Night arm LED is ON when partition 2 is armed in night mode
22. Partition 2 – Day arm LED is ON when partition 2 is armed in day mode
23. Partition 1 – Alarm LED is ON when there is alarm in partition 1
24. Partition 2 – Alarm LED is ON when there is alarm in partition 2
25. Partition 1 or 2 – Alarm LED is ON when there is alarm in partition 1 or 2
26. Trouble LED is ON when there is trouble in the system
27. Partition 1 – Not armed LED is ON when partition 1 is disarmed
28. Partition 2 – Not armed LED is ON when partition 2 is disarmed
29. Partition 1+2 – Not armed LED is ON when partitions 1 and 2 are disarmed
255. NOT PRESENT LED will not be used for confirmation
Contact the installer to obtain information on the zone types and output functions.
24. Step 6j. Selecting confirmation for LED 2 in APT-100 keyfob. Proceed in the same
way as in Step 6i.
25. Step 6k. Selecting confirmation for LED 3 in APT-100 keyfob. Proceed in the same
way as in Step 6i.
Pressing the key between Step 6a and 6k will cancel the keyfob adding, but will
not terminate the user adding procedure.
26. Step 7. Adding proximity card. If a device provided with proximity card reader is
installed in the system, a proximity card can be assigned to the user. Press in turn
and
(if a proximity card is to be assigned to the user) or only (if no proximity
card is to be assigned to the user).
27. Step 7a. Selecting card addition method. Press
(if the card code is to be
entered) or select the device, by means of which the card code will be read. The LEDs
corresponding to the addresses of devices are steady on, and the and keys
allow you to select the device (the LED corresponding to the selected module will start
blinking). Having selected the device, press .
28. Step 7b. Adding proximity card. Depending on the selected method:
enter the card code (see: “Entering hexadecimal characters” p. 11) and press ,
bring the card twice close to the reader (displayed messages will prompt you what to
do). Remember that the card number will only be sent by the proximity card
arm/disarm device after the card is moved away from the reader.
Pressing the key in Step 7a or 7b will cancel the card adding.
3.9.2 User editing
1. Enter the user menu and press in turn . User editing is effected by the
“step by step” method, hence the programming step number is presented on the and
LEDs of the first and second partitions (see: page 11, Table 1).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Quick start guide - English - 11 pages

Satel VERSA 10 Additional guide - English - 87 pages

Satel VERSA 10 Installation Guide - English - 36 pages

Satel VERSA 10 User Manual - English - 42 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info