699901
4
Zoom out
Zoom in
Previous page
1/8
Next page
4 RE-4K SATEL
Wire color Function Terminal
green Rx signal AL
white Tx signal LV
black common ground COM
Table 1.
controller and the program, add
adapter wires to the AL and LV terminals, disconnect other wires
Notes:
If you cannot establish communication between the
a 47 k resistor between the LV and +12V terminals.
Before connecting the
from these terminals.
g. 2. Conn ting the PIN3/RX adapter to the controller. Fi ec - green wire – screw it to AL
terminal. - white wire – screw it to LV terminal. - black wire – screw it to COM
terminal.
factory default pas
sword: 1234 (you need
” field, select the computer COM port to be used for communication
oller.
tton.
e
Note: is waiting 1 minute for communication with the DLOAD10 program to be
“Keyfobs receiver
RX/RE/RXH”. The controller configuration window will be displayed.
Starting communication between the controller and the program
1. Run the DLOAD10 program. Access to the program is protected by a password. To obtain
access at the first run of the program, enter the
not enter the factory password, just click “OK”).
2. Click “Communication” “Configuration”. The “Configuration” window will be displayed.
3. In the “Port RS-232
with the contr
4. Click “OK”.
5. Press and hold down the PRG4 controller button.
6. After the LED flashes red once, release the bu
7. Press again and hold down the PRG4 button.
8. When the LED starts flashing (in a repeating “red – green – OFF” sequence), release th
button. The controller is ready to establish communication with the DLOAD10 program.
The controller
established.
9. In the DLOAD10 program, click in turn “File” “New device”
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel RE-4K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel RE-4K in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel RE-4K

Satel RE-4K User Manual - German - 11 pages

Satel RE-4K User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info